Table of Contents
Advertisement
125KHz Proximity Card Reader
The model PRX-1 is a 125KHz proximity card reader and is
designed to be mounted directly to a metal door or window
frame (mullions), making it ideal for applications requiring
an access credential. The proximity card reader transmits
data in 26-Bit Wiegand format, making it compatible with any
of the Wiegand equipped Viking entry controllers.
The PRX-1 delivers non-contact read ranges up to 6 inches
(152 mm), and operates from 5 to 14 VDC. Physical size is
a compact 3.2 x 1.7 x 0.70
inches (80 x 43 x 17 mm).
Mounting is simplified with
horizontal and vertical mounting
slots, which allow the reader to
be conveniently adjusted and
leveled. To allow both indoor and
outdoor
operation
electronics are sealed in tamper
resistant
epoxy
potting.
Concealing
the
mounting
hardware, the PRX-1 ships with
both Black and Ash (Off-White)
covers standard. See DOD 221
for more information.
125KHz Proximity Cards
The PRX-C and PRX-C-ISO are non-contact security cards
that can be presented to the front of a K-1770/75-IP
proximity card reader to allow entrance into a secured area.
The PRX-C is a clam shell card made made from 0.070"
thick plastic to resist bending and folding. A slot is provided
at one end to allow a lanyard to be added for creating a "dog
tag" style neck strap. The PRX-C-ISO is a thin 0.032" thick
flexible "ISO" style proximity card. Much like a credit card,
Related Products
the
PRX-1
the PRX-C-ISO is perfect
for storing in your wallet.
The
PRX-FOB
is
proximity key ring fob with
brass eyelet designed to
attach to a key chain or
necklace. The PRX-FOB's
compact size is only 1.5" x
1.2" x 0.15" making it one
of the smallest available.
The cards and fobs are
custom pre-programmed.
For more information
see DOD 198.
Medium Range 125KHz
Proximity Card Reader
The model PRX-3 is a high
performance medium range
125KHz
proximity
reader.
The
PRX-3's
compact size yet long read
range of up to 16 inches*
make it ideal for parking
control,
gate
access,
turnstiles, etc. It is designed
to be mounted directly to a
wall,
post,
single
electrical box or use an
optional mounting kit for attaching it to a gooseneck pedestal.
Mounting is simplified with horizontal and vertical mounting slots,
which allow the reader to be conveniently adjusted and leveled. To
increase vandal resistance the chassis is a single piece design with
the mounting screws concealed behind a UV stable label.
The proximity card reader transmits data in 26-Bit Wiegand format,
making it compatible with any of the Wiegand equipped Viking entry
controllers. The PRX-3 is equipped with Enhanced Weather
Protection (EWP) for outdoor installations where the unit is
exposed to precipitation or condensation. With its sealed
connections and fully potted electronics the PRX-3 is designed to
meet an IP66 Ingress Protection Rating. For more information
see DOD 228.
Long Range 4 Channel
Transmitters and Receivers
a
LRR-4
includes an integrated red LED, used to indicate both positive button press
and battery strength. They are also equipped standard with a 125KHz HID**
compatible potted proximity module allowing the Transmitter to also be used
as a close range access credential.
The transmitters and receivers operate at 433-MHz allowing a transmission
range of up to 400 ft (line of sight). The LRR-4 receiver has an adjustable
read range, optional external antenna connector, terminal block with 4
channel Wiegand data output and a transducer and LED to confirm
transmitter button press. The LRR-4 has a conformal coated circuit board
mounted in a NEMA 4, 4x rated box for use in outdoor applications.
DOD 226 for more information.
24
card
PRX-3
gang
Viking's model LTR-4 Long Range
Wireless
4
Channel
Transmitters and LRR-4 Long
Range 4 Channel Receivers with
integrated
receive
comprise Vikings high frequency,
long-range (RFID) identification
solution. Intended for security
access control applications, the
LRT-4's wireless communication is
based upon a secure, digital, anti-
playback
routine.
Transmitters have four buttons,
each corresponding to its own
LRT-4
Wiegand output on the LRR-4
Receiver.
Each
Radio
antenna
The
LRT-4
Transmitter
See
Advertisement
Table of Contents
