Viking K-1900-812L-IP Product Manual page 12

7. Phone Number Database
Clicking on the "Phone Number Database" button will open a screen allowing you to program all the Tenants Name's,
Speed Dial Numbers, and Primary and Roll Over phone numbers. Tenant names are stored locally on the PC and are
not uploaded.
The Speed Dial Number is the 1 to 3 digit (0 - 999) number visitors enter on the K-1900-8-IP Series's keypad for the
unit to call the tenant. 3 seconds after the 1 to 3 digit number is entered, the unit will then dial the Primary Phone Number
associated with that Speed Dial Number. If there is no answer or a busy signal is detected, the K-1900-8-IP Series
phone will then dial the Roll Over Phone Number.
The Primary Phone Number programmed in Index 0 is the number that is dialed when the handset is lifted and the
visitor does not dial any digits on the keypad before the "off hook dial delay" timer has expired ( if "Off Hook AutoDial"
is enabled). A second Roll Over Number will be dialed when there is no answer or a busy signal is detected. The
K-1900-8-IP Series phone is factory set with no Primary or Roll Over numbers programmed.
Note: Typical Apartment Applications use the tenant's 1 to 3 digit apartment number as the Speed Dial Number. After
the apartment number is entered the unit will then dial the tenant's phone number.
12