Stopping Operation; Filling The Essential Oil Tray - Easy@Home HTJ-2108-USW User Manual

Operation

Stopping operation

1. To switch off the product, press the power touch key
necessary) until it stops illuminating.
2. Pull the power plug

Filling the essential oil tray

NOTICE!
Risk of damage!
The product can be damaged if you fill the essential oil tray
with water.
− Do not fill the essential oil tray with water.
Fragrance oil can be put in the essential oil tray. The released
vapor absorbs the fragrance oil through the essential oil pad and
distributes it in the ambient air.
The amount of fragrance oil to be used depends on the type of oil
and your personal preferences. If you are not sure, add a little less
fragrance oil to the essential oil tray.
1. Remove the lid
2. Remove the essential oil pad
3. Add fragrance oil into the essential oil tray
4. Put the essential oil pad in the essential oil tray.
Make sure that the essential oil pad can absorb the fragrance oil and that the
fragrance oil does not spill out of the essential oil tray and leak.
5. Place the tray with the essential oil pad on top of the water tank so that the
opening is located on the vapor discharge channel
If you do not want to use fragrance oil, remove the tray and store it in a cool
place.
6. Put the lid on the water tank.
16
out of the power outlet.
7
1 from the water tank
9
.
2
(see Fig. A and C).
8 .
(repeatedly if
5
12 (see Fig. C).