US
Made in China
DIST. & SOLD EXCLUSIVELY BY:
ALDI
BATAVIA, IL 60510
AFTER SALES SUPPORT
SERVICIO POSVENTA
801679
1-888-367-7373
US
10/2020
ULTRASONIC
COOL MIST HUMIDIFIER
HUMIDIFICADOR ULTRASÓNICO
DE NIEBLA FRÍA
1
User Manual
Manual
del usuario
Table of contents
Package contents ................................................................ 3
Components ..............................................................................5
Proper use ................................................................................. 6
Safety ................................................................................... 7
First use ...............................................................................12
Operation ........................................................................... 15
Helpful Hints ............................................................................ 17
Troubleshooting ................................................................ 18
Storage ..............................................................................20
Disposal ..............................................................................20
Need help?
Do you have a question about the HTJ-2060 and is the answer not in the manual?
Questions and answers
How do. You put water in it
To add water to the Easy@Home HTJ-2060 humidifier, follow these steps:
1. Do not fill the tank to the top edge to prevent spills.
2. If you have hard water, use filtered or distilled water to avoid white dust buildup.
3. Do not add medications or other additives to the water. Essential oils should be used as instructed separately.
4. Unscrew the water tank cap by turning it counterclockwise.
5. Fill the water tank with clean water.
6. Screw the water tank cap back on by turning it clockwise.
7. Place the water tank onto the base, ensuring it sits flush with no gaps.
8. Attach the mist lid on top of the water tank and adjust it to direct the mist as desired.
9. Do not move the humidifier while the water tank is on the base to prevent water from spilling into the unit.
This answer is automatically generated
I **** trying to get my HTJ-2060 humidifier to work. When I put water in the tank and connect it to the base, it leaks a lot, primarily out of the bottom of the humidifier. I have tried everything to get it to stop. what can I do differently together it to stop leaking?
To stop the Easy@Home HTJ-2060 humidifier from leaking water, ensure the following:
- Place the humidifier on a non-metallic, lint-free, waterproof, and level surface about 4 inches away from a wall.
- Make sure the water tank cap is screwed on properly.
- Ensure the water basin is not immersed in water to prevent internal damage.
- Check that the water tank, water basin, and water tank cap are dry before storage to avoid mineral deposits that could cause leaks.
- Leave the water tank cap loose during storage to protect the seal.
If water gets inside the central body, take the humidifier to an authorized service center before using it again.
This answer is automatically generated