Setting Up The Product; Filling With Water - Easy@Home HTJ-2108-USW User Manual

Operation
NOTICE!
Risk of damage!
The product can be quickly damaged when used with an
empty water tank.
− Never use the product without water in the water tank.
• It is best to use the product with cool boiled or distilled water.
• Change the water in the water tank on a regular basis to keep the
product clean.
• With a full tank, the product can operate continuously for
7 to 12 hours without having to refill.

Setting up the product

− Connect the product to a power outlet with a power voltage corresponding
to the rating plate.

Filling with water

WARNING!
Risk of electric shock!
If the product falls over with a full water tank, the outcoming
water can flow out onto other electrical devices and cause
electric shock.
− Set the product down in a safe place.
− Empty the water tank if you do not intend to use the
product for an extended period.
− Make sure that the device is unplugged when you are
adding water to it.
1. Grab the water tank
control unit
2. Turn the water tank cap
3. Use the water tank opening
into the water tank (see Fig. F). You can read the water level through the
provided water level window
4. Turn the water tank cap clockwise to put it back on and dry off any remaining
water with a dry cloth (see Fig. F).
14
2 by the carrying handle
. Place the water tank upside down.
4
counterclockwise to take it off (see Fig. E).
15
16 to pour max. 0.74 gallon (2,800 ml) of water
3 .
13
and remove it from the