Cleaning The Essential Oil Pad; Cleaning The Dust Filter; Maintenance; Changing The Silver Ion Ball Filter - Easy@Home HTJ-2108-USW User Manual

Cleaning the essential oil pad

− Wash the essential oil pad
before using it again.

Cleaning the dust filter

1. Remove the water tank
2. Carefully pour out any leftover water in the control unit.
Place the control unit upside down. Push in the bottom cap
left, and remove it from the bottom opening
3. Remove the dust filter
before using it again.
4. Push the bottom cap in and turn it to the right to close the bottom opening
(see Fig. H).

Maintenance

Changing the silver ion ball filter

• The silver ion ball filter ensures that there are no germs in the
stagnant water.
• The silver ion ball filter should be replaced after 160 hours of
operation. Otherwise, it will lose its effectiveness.
1. Remove the water tank
2. Remove the old silver ion ball filter
(see Fig. B).
3. Put the water tank with the vapor absorption unit
the control unit.
You can order/purchase a new silver ion ball filter from the address listed on the
warranty card. Only use original silver ion ball filters.

Storage

− Empty and clean the water tank
control unit
− Keep the product in the original packaging, out of the reach of children, and
in a dry place.
9
2
from the control unit
and wash it with warm water. Let it dry completely
21
2
from the control unit
4
, and wipe all parts dry with a cloth.
with warm water and let it dry completely
19
10
and replace it with a new one
, remove water from the inside of the
2
4
and put it aside.
, turn it to the
20
(see Fig. G and H).
4
and put it aside.
17
facing downward onto
Maintenance
19