Setting Up The Product; Filling With Water - Easy@Home 1094S2022 User Manual

It is best to use the product with cool boiled or distilled water.
Change the water tank's water on a regular basis to keep the product clean.
With a full tank, the product can operate continuously to 24 hours without having to
refill.

Setting up the product

− Connect the product to a socket with a power voltage corresponding to the rating
plate. Make sure that the connection socket
− Connect the hollow plug of the plug-in power supply unit
back of the product.

Filling with water

WARNING!
Risk of electric shock!
If the product falls over with a full water tank, the outcoming water
can flow out onto other electrical devices and cause electric shock.
− Set the product down in a safe place.
− Empty the water tank if you do not intend to use the product
for an extended period.
− Make sure that the device is unplugged when you are adding
water to it.
1. Take off the lid
2. Grab the water tank
. Turn the water tank
9
3. Unscrew the water tank cover
4. Use the water tank opening to pour max. 1 gallon (3 780 ml) of water into the
water tank 5
5. Screw the water tank cover
with a dry cloth.
6. Turn the water tank
from water tank
10
by the carrying handle and remove it from the control unit
5
upside down.
5
. Do not fill water in the mist outlet channel
back on clockwise and wipe off any water residue
6
5 over again and place it on the control unit.
is freely accessible.
11
.
5
6 counterclockwise off the water tank
Operation
to the socket on the
8
5 .
.
7
13