Step 7. Assembling The Lower Stays And Canvas - Hamron 619-466 User Instructions

f) Secure using wire (25) and wire lock (26).

STEP 7. ASSEmBLING THE LoWER STAYS AND cANVAS

the canvas is fitted with stay tunnels top to bottom along the walls on each side. the white side
should be facing inwards.
a) lay out the canvas with the stay tunnels along the frame wall and the white side facing upwards.
b) fit the stay (7) and (8) in 4 pairs (2 x pairs for each side)
7
the figure below shows the placement of the stays once they are inserted in the canvas.
8
EN SE
53