Step 4. Assembling The Supports - Hamron 619-466 User Instructions

EN SE
fig. f

STEP 4. ASSEmBLING THE SUPPoRTS.

a. there are 4 x corner supports and 2 x mid-supports (fig. f.) the corner supports consist of parts (1),
(2) and (3). the mid-supports consist of parts (1) and (4).
TIP: the blocker on part (1) and (2) should be turned downwards in order to correctly join to the next
section.
b. fit the first mid-support on one side (fig. G). one person lifts one corner of the roof frame whilst
another person inserts the mid-support in the bracket. fit the corner supports (fig. h).
c. repeat on the other side (fig. i).
NoTE: no screws are used to assemble the supports for the roof frame.
50
fig. h
fig. G
fig. i