Seagate ST1500LM012 Product Manual page 10

Table 1 Drive Specifications Summary (continued)
Drive Specification
Operational Shock
Non-Operational Shock
Vibration, operating
Vibration, non-operating
Nonrecoverable read errors
Rated workload
Warranty
Load-unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
1. One GB equals one billion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
If the drive is powered-off before issuing flush cache command, in some instances,
Note
the end user data in the DRAM cache might not be committed to the disk.
Seagate Mobile HDD Product Manual, Rev. A
ST2000LM007
and ST2000LM010
Average annualized workload rating: <55 TB/year.
The specifications for the product assumes the I/O workload does not exceed the average
annualized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate may
degrade and impact reliability as experienced by the particular application. The average annu-
alized workload rate limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the following web
page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for the drive.
600,000 at 25°C, 50% rel. humidity
ST1500LM012
400 Gs at 2 ms max
1000 Gs at 1 ms max
5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
5–500 Hz: 5.0 Gs
14
1 per 10 bits read
Yes
Drive Specifications
9