ADT Fall Detection Pendant User Manual page 9

To cancel a false alarm
For no alarm to be sent to the emergency response center.
To cancel the Fall Detection alarm during the
first 20 seconds after a fall was detected:
Ƽ
Press and hold the blue emergency help
button on the Fall Detection pendant for five
seconds until it flashes green once and you
hear a series of beeps.
Ƽ
For Medical Alert Plus users:
cancel the fall detection alarm by pressing
the blue RESET button on the base station.
Ƽ
For On-the-Go users:
fall detection alarm with the mobile device.
You must press the blue button on the Fall
Detection pendant to cancel the alarm.
Ƽ
If you cancel the fall detection alarm, your
"alarm cancelled."
base station states,
9
You can also
You cannot cancel the
If the help button was pressed on the Fall
Detection pendant, you cannot manually
cancel the alarm...
Ƽ
Wait for the emergency operator to speak
to you through the Medical Alert device.
Ƽ
Tell the operator that this is not an
emergency and that you do not need help.