Paradox Esprit 748 Express Programming Manual
  1. Manuals
  2. Brands
  3. Paradox Manuals
  4. Security System
  5. Esprit 748 Express
  6. Programming manual

Paradox Esprit 748 Express Programming Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

CONTROL PANEL RESET:
Installer lock must be unlocked.
(Address 058: enter any value other than 147)
Power down reset
(1) Remove battery and AC to power down the unit.
(2) Connect a jumper between "reset jumper" pins.
(3) Connect AC and/or battery.
(4) Wait 3 seconds.
(5) Remove jumper.
Factory default installer and master codes will be reinstated. Values entered at addresses 008-043, 062-126 and 300-523
as well as all user codes, will be erased ([2
HEXA PROGRAMMING:
All digits from 0 to F are valid. Values are programmed into
memory locations from address 000 to 043 and from address
300 to 523.
1) Press [
] + installer code.
ENTER
2) [
] will flash (programming mode).
ENTER
3) Enter 3 digit memory address.
4) Current value will be displayed on keypad.
5) Enter 2 digit data.
6) Go to step 3 for next address.
To exit programming mode, press [
STREAMLINED SECTION PROGRAMMING
Can be used to program sections 00 to 66. (addresses 000 to 043 and 300 to 523)
Press [
], installer code, and [7].
ENTER
Enter a 2-digit section number, followed by 8 digits to program that section (confirmation beep). Data will be saved
automatically and the software advances to the next programming section. To exit programming mode press [
INSTALLER CODE:
Full access to programming, except access codes. (addresses 127-299) No access to arming/disarming. Can be used to
modify installer code. Use only numeric keys from [1] to [10]. (key [10] = 0)
PANEL ANSWER OPTIONS:
First digit disables "Answering Machine Override" (key [2
second call (see table below). Second digit determines number of rings required before panel will answer. If [2
is entered, panel will not answer. (Default value is [2
SOFTWARE VERSION 3.00
] [2
]). Programmed values of all other addresses do not change.
ND
ND
].
CLEAR
([2
] and [
ND
(reset code 747474)
HEXA DISPLAY
If key is lit = 8
If key is lit = 8 = 4
No display = SKIP (empty)
10 = [0] = [A]
] keys alternately flash.)
ENTER
(addresses 000, 001, 002)
(address 003)
] or key [1]), or determines period of time between first and
ND
] [8].)
ND
- 1 -
PG748EX-961111-0002
Value of
= 4
=
2
=
1
2
ND
digit = 10
( 8 + 2 = 10)
Value of
1
ST
digit = 3
( 2 + 1 = 3)
=
2
=
1
VALUE
No light = 0
CLEAR
SECTION 00
SECTION 00
= "3A"
].
][2
]
ND
ND

Advertisement

Table of Contents
loading

Related Manuals for Paradox Esprit 748 Express

Summary of Contents for Paradox Esprit 748 Express

  • Page 1 PG748EX-961111-0002 SOFTWARE VERSION 3.00 CONTROL PANEL RESET: Installer lock must be unlocked. (Address 058: enter any value other than 147) Power down reset (1) Remove battery and AC to power down the unit. (2) Connect a jumper between "reset jumper" pins. (3) Connect AC and/or battery.

  • Page 2: Telephone And Account Numbers

    PG748EX TELEPHONE AND ACCOUNT NUMBERS: (reset empty) If only one central station phone number is used, program the same number for telephone number 1 and 2. [10] = the number "0" = switch from pulse to tone while dialing [11] = pause 4 seconds [12] = end of number...
  • Page 3 PG748EX Streamline Data Description Address section ___/___ Future use TIME CORRECTION: ___/___ 1st digit: value must be entered i.e. (address 037 second digit) 2nd digit: time correction (See table) - No adjustment - Minus 4 sec. ___ ___ - Plus 4 sec.

  • Page 4: Reporting Codes

    PG748EX REPORTING CODES: (reset code = “empty" ] [2 All digits from are valid. Enter (skip) = digit will not be reported except for contact I.D. programmable codes. If CONTACT I.D. format (all codes) is selected, addresses 300 to 523 (sections 11 to 66) do not have to be programmed. (Select Contact I.D (all codes) - key [10] for both central station numbers at section...
  • Page 5 PG748EX REPORTING CODES: (reset code DISARMING (opening) CODES: Streamline Data Description Address Streamline Data Description Address section section See previous page ___/___ User code 25 ___/___ User code 26 ___/___ Espload ___ __ User code 27 ___/___ Master ___/___ User code 28 ___/___ ___/___ User code 1...
  • Page 6 PG748EX REPORTING CODES: (reset code ZONE 1 TO 12 RESTORE CODES: ZONE 13 TO 24 RESTORE CODES: Streamline Data Description Address Streamline Data Description Address section section ___/___ Zone 1 ___/___ Zone 13 Keypad 1 ___/___ Zone 2 ___/___ Zone 14 Keypad 2 ___/___ Zone 3...

  • Page 7: Decimal Programming

    PG748EX DECIMAL PROGRAMMING 3 Digit Decimal Value Programming Used to program addresses 044 to 061. Values entered must contain 3 digits between "000" and "255". ([10] = 0) Decimal value programming: 1) Press [ ] + installer code. ([ ] key will flash.) ENTER ENTER 2) Enter 3 digit address (044 to 061).

  • Page 8: Feature Select Programming

    PG748EX DECIMAL PROGRAMMING 049: ___/___/___ (seconds) Exit delay (factory default 60 seconds) 050: ___/___/___ (seconds) Entry delay 1 (factory default 45 seconds) 051: ___/___/___ (seconds) Entry delay 2 (factory default 45 seconds) 052: ___/___/___ (minutes) Bell cut-off time (factory default 5 minutes) 053: ___/___/___ ( x 15 mSec.) Zone speed (factory default 600 mSec.) 054: ___/___/___ (minutes) Power failure report delay (factory default 30 minutes) (000 = disabled) 055: ___/___/___ ( x 15 minutes) "No movement"...

  • Page 9: Telephone Line Monitor

    PG748EX FEATURE SELECT PROGRAMMING (continued) (On/off status of key lights determines which feature is selected.) TELEPHONE LINE MONITOR OFF / 086: Address 086, Key [2 ] [1] See "TLM" table [2 ] PS1/Keyswitch = regular arm stay arm / System A TLM disabled OFF OFF PS1/keyswitch arming...

  • Page 10: Key Access Programming

    PG748EX KEY ACCESS PROGRAMMING Programs features quickly, without entering addresses or section numbers. To activate “key access programming”, press [ ], followed by installer, master or user code 1. (Code required ENTER depends on the feature you wish to access - see below.) Press the key corresponding to the desired feature. Press [ ] or [ ] to exit.

  • Page 11: Zone Connections

    PG748EX The system hardware will recognize the following zone conditions: ZONE CONNECTIONS ZONE connection, without EOL (N.C. contacts) address 088, key [ ] = "on" key [10] = "off " (reset) key [11] = "off " (reset) address 090, key [8] = "off" N.C.

  • Page 12: Wiring Diagram

    Power supervision relay model MR3-UL. S E C U R I T Y S Y S T E M S Paradox Security Systems Graphic Dept 780 Industrial Blvd., St-Eustache, Montreal, Quebec, Canada J7R 5V3 Fax: (514) 491-2313 http://www.paradox.ca PRINTED IN CANADA...

Table of Contents