Table of Contents
Advertisement
Charging the batteries
The batteries are supplied partially charged. Please charge completely before use. (The batteries
are fully charged when the power icon
¤
Charge the handset in the base for 8.5 hours.
Notes
u
The handset may only be placed in the designated base/charging cradle.
u
The battery may heat up during charging. This is not dangerous.
u
After a time, the charge capacity of the battery will decrease for technical reasons.
Changing the display language
Change the display language if you do not understand the language currently set.
L5
¤
¤
v
Registering the handset
Handsets contained in the package have already been registered to the base.
If, however, a handset has not been registered (display "Please register handset" or "Place
handset in base"), you must register it to the base.
u
Automatically registering the Gigaset handset to base station CL540:
¤
Place the handset in the base.
If automatic registration does not work, the handset will have to be registered manually.
u
Manually registering the handset:
¤
On the base: Press and hold (min. 3 secs) the Registration/paging key.
¤
On the handset CL540, press the display key Register.
Ï
Or:
¤
¤
v
Display shows: Searching for a base in registration mode. The connection to the base will be
established; this may take some time.
¤
Enter the system PIN if required (factory setting: 0000)
da en fi no sv
8.5 h
q Select language
¤
q Registration
OK
disappears from the display.)
¤
Select (Ø = selected)
¤
¤
OK
Register Handset
¤
Getting started
¤
OK
OK
9
Advertisement
Table of Contents
