Table of Contents
Advertisement
Getting started
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the rubber seal for the headset plug socket
Open the battery cover and insert the rubber seal
into the groove.
Insert battery
Caution
Use only rechargeable batteries recommended by Gigaset Communications GmbH , as this
could otherwise result in significant health risks and personal injury. For example, the outer
casing of the batteries could be destroyed or the batteries could explode. The phone could
also malfunction or be damaged as a result of using batteries that are not of the recom-
mended type.
¤
Insert the batteries
with the polarity in
the right direction
(for correct +/- direc-
tion, see diagram).
8
¤
First orientate the battery
cover with the side tabs
fitting into the slots on the
inside of the casing.
¤
Then press the cover until
it clicks into place.
If you have to open the bat-
tery cover:
¤
Grip the side hollows
and slide the battery
cover diagonally
upwards.
da en fi no sv
Advertisement
Table of Contents
