Download Print this page
Tempur-Pedic 99300728-b Owner's Manual
Tempur-Pedic 99300728-b Owner's Manual

Tempur-Pedic 99300728-b Owner's Manual

Pressure reliveing swedish mattress and pillow

Advertisement

Quick Links

OWNERS MANUAL
Serial No.
99300728-b EDR10679 5/06

Advertisement

loading
Need help?

Need help?

Do you have a question about the 99300728-b and is the answer not in the manual?

Questions and answers

Summary of Contents for Tempur-Pedic 99300728-b

  • Page 1 OWNERS MANUAL Serial No. 99300728-b EDR10679 5/06...
  • Page 3 Adjustable Bed Customer Service Center PO Box 668 Lexington, NC 27293 800-888-3078 Warranty Service E-mail: tempurservice@leggett.com Please do not contact retail dealer or any other service personnel. www.lpadjustablebeds.com Copyright © 2006 Tempur-Pedic, Inc. Copyright © 2006 Leggett & Platt, Inc. All Rights Reserved...
  • Page 4 “warranty commencement date” which is the date of purchase for new READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT unused beds and the date of manufacture for beds that have been used as floor or display This Tempur-Pedic ® adjustable bed has been quality engineered with design features to models.
  • Page 5 TROUBLESHOOTING ADVISORY In the event the Tempur-Pedic adjustable bed fails to operate, investigate the symptoms ® IMPORTANT INFORMATION and possible solutions provided in the chart below: SYMPTOM SOLUTION READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT This Tempur-Pedic ®...
  • Page 6 ACOUSTICS ACCESSORIES LIFTING/LOWERING MECHANISMS LOCATION ENVIRONMENT Tempur-Pedic ® OPTIONAL EQUIPMENT The lift/lower feature will emit a minimal The level of sound experienced during Contact customer service toll free (800-888-3078) to order the accessories indicated in the humming sound during operation. This is operation is directly related to the location chart below.
  • Page 7 TEMPUR-ERGO PROGRAMMING separating 2 beds INSTALLATION The six step procedure below is required to separate 2 hand controls from operating 2 beds. For installation and setup, complete the numbered procedure indicated below and on the One hand control per bed operation will result. Before beginning, make certain the beds are following pages: plugged into a working grounded electrical outlet.
  • Page 8 INSTALLATION TEMPUR-ERGO PROGRAMMING 2 hand controls - 2 beds 2. Carefully lift the bed base frame from the The six step procedure below is required to program 2 hand controls to operate 2 beds. Before shipping carton, keeping the unit top-side- beginning, make certain the beds are plugged into a working grounded electrical outlet.
  • Page 9 TEMPUR-ERGO PROGRAMMING 1 hand control - 2 beds INSTALLATION The three step procedure below is required to program 1 hand control to operate 2 beds. 10. Install mattress retainer as follows: STANDARD MATTRESS Before beginning, make certain the beds are plugged into a working grounded electrical RETAINER a.
  • Page 10 INSTALLATION TEMPUR-ERGO PROGRAMMING 2 hand controls - 1 bed HEADBOARD BRACKET INSTALLATION The three step procedure below is required to program 2 hand controls to operate 1 bed. When attaching (2) twin size units to a king Before beginning, make certain the bed is plugged into a working grounded electrical size headboard, use a swing hinge kit (see outlet.
  • Page 11 TEMPUR-ERGO PROGRAMMING 1 hand control - 1 bed INSTALLATION The two step procedure below is required to program 1 hand control to operate 1 bed. 11. Install headboard brackets to the bed base frame per the following instructions: USE (2) 3 INCH CARRIAGE BOLTS AND Before beginning, make certain the bed is plugged into a working grounded electrical NUTS TO ATTACH EACH BRACKET outlet.
  • Page 12 After activating the head and/or Press the custom button to return foot massage motors, press and Typical Tempur-Pedic ® the bed to the custom hold the wave massage button to programmed position. adjustable bed the activate the wave feature.