Initial Setup - ViewSonic VS18478 User Manual

Initial Setup

Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
NOTE: For use only with a UL certified wall mount kit/bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum Hole pattern
Loading
23.7 kg 200 x 100 mm 235 x 135 x 2 mm
113.6 400 x 200 mm 435 x 235 x 2 mm
NOTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Attach the mounting bracket to the VESA mounting holes at the rear of the
monitor. Then secure it with four (4) screws (M6 x 12 mm).
4. Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
Interface Pad
(W x H) (W x H x D)
Pad Hole
Ø 8 mm
Ø 8 mm
400 mm
200 mm
9
Screw Specification
& Quantity
M6 x 12 mm
4 pieces
M6 x 12 mm
4 pieces