Starting The Generator (Electric Start-Lpg) - Firman H07552 Owner's Manual

6. Move
located on
"START"
8. Move the
to the
position.
9. Allow generator to run at no load for few
minutes upon each initial start-up to permit
engine and generator to stablize.

Starting the Generator (Electric Start-LPG)

1. Before starting the generator, check for loose
or missing parts and for any damage which
may have occurred during shipment.
2. Check oil level .
English
choke lever
engine to
position.
choke lever
"RUN"
3 sec
NOTE: When the fuel selector switch is turned
to the "LPG" position, the indicator light will
become RED up to 4 minutes(before goes off).
Starting the engine successfully during these 4
minutes will turn the indicator light GREEN. 6.
Disconnect all electrical loads from the
Never start or stop the generator
devices plugged in or turned
generator.
with electrical
on.
Customer Service: 1-844-FIRMAN1Page 15