Firman H07552 Owner's Manual page 39

8. Do not over-choke. As soon as engine
starts and warms up, move the choke lever to
the "RUN" position.
6. Move choke lever located on engine to "START" position.
English
9. Allow generator to run at no load for few
minutes upon each initial start-up to permit
engine and generator to stablize.
Starting the Generator (Recoil Start-LPG]
1. Before starting the generator, check for loose
or missing parts and for any damage which
may have occurred during shipment.
2. Check oil level .
Customer Service: 1-844-FIRMAN1Page 11