Using The Handscanner With Datawedge; Introduction; Configuring Datawedge - HID Technology Solutions 1062 Manual

Using the 1062 Handscanners with Motorola WT4000

4. Using the Handscanner with DataWedge

4.1.
Motorola DataWedge is an application which allows data from an external peripheral to be directed to
the current cursor position. DataWedge allows barcode data to be entered into existing applications
without any software modifications being required.
The installation of DataWedge is covered in the User Guide included in the download package of
DataWedge. It is assumed that DataWedge has been installed to the terminal as described in the
User Guide and a link has been placed on the Start Menu.
4.2.
Launch DataWedge from Start Menu > Programs > DataWedge.
By default DataWedge attempts to initialise the built in or tethered barcode scanner when it is first run.
The following two error screens will be seen, press OK to step through each one:
Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited
provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer's products.
Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which
may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the
author.
www.tsl.com

Introduction

Configuring DataWedge

Page 6 of 22
Using the 1062 Handscanners with Motorola WT4000.pdf
1062