Using Btexplorer; Introduction; Discovering The Handscanner - HID Technology Solutions 1062 Manual

Using the 1062 Handscanners with Motorola WT4000

7. Using BTExplorer

7.1.
It is recommended that Technology Solutions' Pairing Wizard application is used to set up the
connection to the Handscanner whenever possible. This provides a simple user interface requiring
minimal interaction. If special applications require the use of BTExplorer (the inbuilt Bluetooth
Manager) then the following sections provide instructions for using BTExplorer.
7.2.
Launch BTExplorer via Start Menu > Programs > BTExplorer. If no devices have been connected
previously the following screen will be seen:
Switch the Handscanner on by pressing and releasing the yellow button on top. The blue LED on the
Handscanner will start to flash slowly.
Open the BTExplorer menu (ALT ALT) and step to 'New connection'. Press ENTER and then scroll
down through the list of options to 'Associate Serial Port':
Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited
provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer's products.
Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which
may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the
author.
www.tsl.com

Introduction

Discovering the Handscanner

Page 17 of 22
Using the 1062 Handscanners with Motorola WT4000.pdf
1062