Pairing To The Handscanner - HID Technology Solutions 1062 Manual

Using the 1062 Handscanners with Motorola WT4000 1062
7.3.

Pairing to the Handscanner

BTExplorer will attempt to pair to the selected Handscanner and the window shown below will appear
for the PIN to be entered:
For Handscanner in the Factory Default mode the PIN is 0000. Enter this using the keyboard on the
terminal and then press ENTER.
BTExplorer then displays a summary screen. It is possible to TAB to the 'Favourite Name' section and
enter a different description, but it is recommended that the suggested text is retained.
Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited
provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer's products.
Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which
may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the
author.
Page 19 of 22
www.tsl.com
Using the 1062 Handscanners with Motorola WT4000.pdf