970 Operating Elements Trigger button Plug-in socket for external trigger Battery compartment Folding print cartridge Print carriage Print cartridge Base station Lock print cartridge Protective Nozzle Seal Contact print cartridge LED indicator Nozzles Set wheel Sealing tip Green charge display...
WARNING Possible blinding in case of contact between ink and eyes. Never hold the jetStamp graphic 970 with its nozzles pointing at the face of persons! CAUTION Possible tripping and damage to the device from device lines placed freely in the room.
Fig. Depending on ink type used, different Protective Nozzle Seals are required. Use sealing of the enclosed printing cartridge. Put the jetStamp graphic 970 in the base station to position 1. Turn the setting wheel Keep the trigger button...
If the installation programme does not start up automatically, start the file “setup.exe”. Observe the installation programme instructions. 1.4. Firmware update The most up to date firmware for the jetStamp graphic 970 can be downloaded from the REINER website (www.reiner.de). 1.5. Recognising and Removing Interferences For more information, see the online help of the PCset graphic software, or the enclosed USB memory stick.