Aaeon FSB-B75G Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. FSB-B75G
  6. Manual

Aaeon FSB-B75G Manual

Full-size sbc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
F u l l - s i z e S B C
F S B - B 7 5 G
Intel
LGA 1155 Processor
Full-size CPU Card
With DDR3, 2 Gigabit Ethernet
USB 3.0/ USB2.0, SATA 6.0Gb/s
FSB-B75G Manual Rev.A 2nd Ed.
FSB-B75G
®
TM
Core
i7/i5/i3
March 2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FSB-B75G and is the answer not in the manual?

Questions and answers

Related Manuals for Aaeon FSB-B75G

Summary of Contents for Aaeon FSB-B75G

  • Page 1 F u l l - s i z e S B C F S B - B 7 5 G FSB-B75G ® Intel Core i7/i5/i3 LGA 1155 Processor Full-size CPU Card With DDR3, 2 Gigabit Ethernet USB 3.0/ USB2.0, SATA 6.0Gb/s FSB-B75G Manual Rev.A 2nd Ed. March 2013...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 F u l l - s i z e S B C F S B - B 7 5 G Acknowledgments All other products’ name or trademarks are properties of their respective owners.  AMI is a trademark of American Megatrends Inc. ®...
  • Page 4  USB Cable  SATA Cables  5V & PS_ON Cable  DVD-ROM for manual (in PDF format) and Drivers  FSB-B75G If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.

  • Page 5: Table Of Contents

    F u l l - s i z e S B C F S B - B 7 5 G Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 F u l l - s i z e S B C F S B - B 7 5 G 3.1 System Test and Initialization........3-2 3.2 AMI BIOS Setup ............3-3 Chapter 4 Driver Installation 4.1 Installation ..............4-3 Appendix A Programming The Watchdog Timer A.1 Programming ............A-2 A.2 W83627DHG Watchdog Timer Initial Program..A-6...

  • Page 7: Chapter 1 General Information

    F u l l - s i z e S B C F S B - B 7 5 G Chapter General Information Chapter 1 General Information...

  • Page 8: Introduction

    B75 chipset and the Intel generation Core™i7/i5/i3 LGA 1155 processor, to fulfill the increasing demands of multi-core processing. In a PICMG 1.0 form factor, the FSB-B75G system host board takes ® full advantage of the Intel B75 chipset for enhanced system performance and generous expansion capabilities.

  • Page 9: Features

    F u l l - s i z e S B C F S B - B 7 5 G 1.2 Features ®  Intel Generation Core i7/i5/i3 LGA 1155 Processor ®  Intel B75 Chipset  Dual-Channel DDR3 1333/1600 DIMM Socket x 2 (Up to 16 GB) ®...

  • Page 10: Specifications

    F u l l - s i z e S B C F S B - B 7 5 G 1.3 Specification System  Form Factor PICMG 1.0 Full size SBC ®  Processor Intel Generation Core i7/i5/i3 LGA 1155 Processor ...
  • Page 11 F u l l - s i z e S B C F S B - B 7 5 G  Operating Humidity 5%~90% resistive humidity, non-condensing Display ®  Chipset Intel ®  Graphic Engine Integrated Intel HD Graphics ...

  • Page 12: Chapter 2 Quick Installation Guide

    F u l l - s i z e S B C F S B - B 7 5 G Chapter Quick Installation Guide 2 - 1 Chapter 2 Quick Installation Guide...

  • Page 13: Safety Precautions

    F u l l - s i z e S B C F S B - B 7 5 G 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components.

  • Page 14: Location Of Connectors And Jumpers

    F u l l - s i z e S B C F S B - B 7 5 G 2.2 Location of Connectors and Jumpers 2 - 3 Chapter 2 Quick Installation Guide...

  • Page 15: Mechanical Drawing

    F u l l - s i z e S B C F S B - B 7 5 G 2.3 Mechanical Drawing 2 - 4 Chapter 2 Quick Installation Guide...

  • Page 16: List Of Jumpers

    F u l l - s i z e S B C F S B - B 7 5 G 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: Jumpers Label...
  • Page 17 F u l l - s i z e S B C F S B - B 7 5 G DIO1 Digital I/O Pin Header FDD1 Floppy Pin Header LPT1 Parallel Port Pin Header USB1 USB 3.0 Pin Header USB5 USB 3.0 Pin Header USB2 USB Pin Header...

  • Page 18: Setting Jumpers

    F u l l - s i z e S B C F S B - B 7 5 G 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 19: Auto Power Button (Jp2)

    F u l l - s i z e S B C F S B - B 7 5 G 2.7 Auto Power Button (JP2) Function Power ON by Button (default) Auto Power ON 2.8 Clear CMOS (JP3) Function Protected (default) Clear 2.9 Front Panel Connector (FP1) Signal...

  • Page 20: Digital I/O Pin Header (Dio1)

    F u l l - s i z e S B C F S B - B 7 5 G 2.11 Digital I/O Pin Header (DIO1) Signal Signal DIO_30 DIO_31 DIO_32 DIO_33 DIO_34 DIO_35 DIO_36 DIO_37 2.12 USB3.0 Port Pin Header (USB1, USB5) Signal Signal USB3_RX1_DN_C...

  • Page 21: Ps_On# Pin Header (Cn2)

    MSDATA MSCLK Remarks: The FSB-B75G is designed for ATX system only. When used in AT system, the 5VSB and PSON should be connected by a 3-pin power cable (1703030501, including in accessory bag) to short 1-3 pin. 2 - 10...
  • Page 22 F u l l - s i z e S B C F S B - B 7 5 G Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯...
  • Page 23 F u l l - s i z e S B C F S B - B 7 5 G Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 24: System Test And Initialization

    4. The CMOS memory has lost power and the configuration information has been erased. The FSB-B75G CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.

  • Page 25: Ami Bios Setup

    F u l l - s i z e S B C F S B - B 7 5 G 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM and BIOS NVRAM so that it retains the Setup information when the power is turned off.
  • Page 26 F u l l - s i z e S B C F S B - B 7 5 G Setup Menu Setup submenu: Main Chapter 3 AMI BIOS Setup 3-4...
  • Page 27 F u l l - s i z e S B C F S B - B 7 5 G Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5...
  • Page 28 F u l l - s i z e S B C F S B - B 7 5 G ACPI Settings Options Summary : ACPI Sleep State S1 Only (CPU Stop Clock) S3 Only (Suspend to RAM) Default Select ACPI sleep state the system will enter when the SUSPEND button is pressed.
  • Page 29 F u l l - s i z e S B C F S B - B 7 5 G CPU Configuration Options Summary : Intel Virtualization Disabled Default Technology Enabled When enabled, a VMM can utilize the additional hardware capabilities provided by Vander pool Technology Chapter 3 AMI BIOS Setup 3-7...
  • Page 30 F u l l - s i z e S B C F S B - B 7 5 G SATA Configuration (IDE) Chapter 3 AMI BIOS Setup 3-8...
  • Page 31 F u l l - s i z e S B C F S B - B 7 5 G SATA Configuration (AHCI) Options summary : SATA Controller(s) Enabled Default Disabled Enable or disable SATA device. SATA Mode Selection Default AHCI Determines how SATA controller(s) operate.
  • Page 32 F u l l - s i z e S B C F S B - B 7 5 G USB Configuration Options summary : Legacy USB Support Enabled Default Disabled Auto Enable Legacy USB support. Auto option disables legacy support if no USB devices are connected.
  • Page 33 F u l l - s i z e S B C F S B - B 7 5 G W83627DHG Super IO Configuration Options Summary : Floppy Disk Controller Set Parameters of Floppy Disk Controller Configuration (FDC) Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA) Serial Port 2 Configuration Set Parameters of Serial Port 2 (COMB)
  • Page 34 F u l l - s i z e S B C F S B - B 7 5 G Floppy Disk Controller Configuration Options Summary : Floppy Disk Controller Disabled Enabled Default Enable or Disable Floppy Disk Controller Chapter 3 AMI BIOS Setup 3-12...
  • Page 35 F u l l - s i z e S B C F S B - B 7 5 G Serial Port 1 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=3F8h;...
  • Page 36 F u l l - s i z e S B C F S B - B 7 5 G Serial Port 2 Configuration Options Summary : Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto Default IO=2F8h;...
  • Page 37 F u l l - s i z e S B C F S B - B 7 5 G RS485 RS232/422,485 switch Parallel Port Configuration Options Summary : Parallel Port Disabled Enabled Default Enable or Disable Parallel Port (LPT/LPTE) Change Settings Auto Default...
  • Page 38 F u l l - s i z e S B C F S B - B 7 5 G IO=378h; IRQ=5,6,7,10,11,12 IO=278h; IRQ=5,6,7,10,11,12 IO=3BCh; IRQ=5,6,7,10,11,12 Select an optimal setting for Super IO device. Device Mode STD Printer Mode Default SPP Mode EPP-1.9 and SPP Mode EPP-1.7 and SPP Mode...
  • Page 39 F u l l - s i z e S B C F S B - B 7 5 G W83627DHG HW Monitor Options Summary : Smart Fan Function Disabled Enabled Default Enable or Disable Smart Fan Smart Fan Mode Configuration Smart Fan Mode Select Chapter 3 AMI BIOS Setup 3-17...
  • Page 40 F u l l - s i z e S B C F S B - B 7 5 G Smart Fan Mode Configuration Options Summary : SYS Smart Fan Mode Manual Mode Default Thermal Cruise Mode Fan Speed Cruise Mode SYS Smart Fan Mode Select SYSFAN PWM/DC Voltage Output 0~255...
  • Page 41 F u l l - s i z e S B C F S B - B 7 5 G Fan Speed Cruise Mode SMART FAN III Mode CPU Smart Fan 0 Mode Select CPUFAN0 PWM/DC Voltage 0~255 Default : 255 Output Input expect PWM Output Value(Range: 0 –...
  • Page 42 F u l l - s i z e S B C F S B - B 7 5 G Dynamic Digital IO( Default Disabled) Chapter 3 AMI BIOS Setup 3-20...
  • Page 43 F u l l - s i z e S B C F S B - B 7 5 G Dynamic Digital IO(Enabled) Options Summary : Dynamic Digital IO Configuration Dynamic Digital IO Configuration Chapter 3 AMI BIOS Setup 3-21...
  • Page 44 F u l l - s i z e S B C F S B - B 7 5 G Dynamic Digital IO Configuration Options Summary : DIO0 Direction Input Default Output Set Digital IO as Input or Output DIO1 Direction Input Default Output...
  • Page 45 F u l l - s i z e S B C F S B - B 7 5 G DIO3 Direction Input Default Output Set Digital IO as Input or Output DIO4 Direction Input Output Default Set Digital IO as Input or Output DIO5 Direction Input Output...
  • Page 46 F u l l - s i z e S B C F S B - B 7 5 G S5 RTC Wake Settings Options Summary : Wake system with Fixed Time Disabled Default Enabled Enable or disable System wake on alarm event. When enabled, System will wake on the hr::min::sec specified Wake system with Dynamic Time Disabled...
  • Page 47 F u l l - s i z e S B C F S B - B 7 5 G Setup submenu: Chipset Options Summary : System Agent (SA) Configuration System Agent (SA) Parameters PCH-IO Configuration PCH Parameters Chapter 3 AMI BIOS Setup 3-25...
  • Page 48 F u l l - s i z e S B C F S B - B 7 5 G System Agent (SA) Configuration Options Summary : Graphics Configuration Configure PEGO B0:D1:F0 Fen1-Gen3 Chapter 3 AMI BIOS Setup 3-26...
  • Page 49 F u l l - s i z e S B C F S B - B 7 5 G Graphics Configuration Options Summary : Primary Display Auto Default IGFX Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx.
  • Page 50 F u l l - s i z e S B C F S B - B 7 5 G Keep IGD enabled based on the setup options. DVMT Pre-Allocated Default 128M 160M 192M 224M 256M 288M 320M 352M 384M 416M 448M 480M...
  • Page 51 F u l l - s i z e S B C F S B - B 7 5 G Primary IGFX Boot Display VBIOS Default Default Select the Video Device which will be activated during POST. This has no effect if external graphics present.
  • Page 52 F u l l - s i z e S B C F S B - B 7 5 G PCH-IO Configuration Options Summary : Power Mode ATX Type Default AT Type Select power supply mode. PCI Express Configuration PCI Express Configuration settings PCH Azalia Configuration PCH Azalia Configuration settings.
  • Page 53 F u l l - s i z e S B C F S B - B 7 5 G Enabled Default En/Disable Onboard LAN 2 (RTL8111E) RI# Wake Disabled Enabled Default For En/Disable Ring In wake up function. Attention please, when this function is enabled, some devices which connect to Serial Port may cause the system auto wake up from sleep mode.
  • Page 54 F u l l - s i z e S B C F S B - B 7 5 G PCI Express Configuration Options Summary : PCI Express Root Port 1 Disabled Enabled Default Control the PCI Express Root Port. PCIe Speed Auto Gen 1...
  • Page 55 F u l l - s i z e S B C F S B - B 7 5 G Control the PCI Express Root Port. PCIe Speed Auto Gen 1 Gen 2 Select PCI Express port speed. PCI Express Root Port 3 Disabled Enabled Default...
  • Page 56 F u l l - s i z e S B C F S B - B 7 5 G PCH Azalia Configuration Options Summary : Azalia Disabled Enabled Auto Default Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled Enabled = Azalia will be unconditionally Enabled Auto = Azalia will be enabled if present, disabled otherwise.
  • Page 57 F u l l - s i z e S B C F S B - B 7 5 G Setup submenu: Boot Options summary : Quiet Boot Disabled Enabled Default Enables or disables Quiet Boot option Launch PXE OpROM Disabled Default Enabled...
  • Page 58 F u l l - s i z e S B C F S B - B 7 5 G Boot Option Priorities Options Summary : Boot Option #X Your device Your device Sets the system boot order Chapter 3 AMI BIOS Setup 3-36...
  • Page 59 F u l l - s i z e S B C F S B - B 7 5 G Setup submenu: Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility.
  • Page 60 F u l l - s i z e S B C F S B - B 7 5 G Removing the Password Highlight this item and type in the current password. At the next dialog box press Enter to disable password protection. Setup submenu: Exit Chapter 3 AMI BIOS Setup 3-38...

  • Page 61: Chapter 4 Driver Installation

    F u l l - s i z e S B C F S B - B 7 5 G Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 62 F u l l - s i z e S B C F S B - B 7 5 G The FSB-B75G comes with a DVD-ROM that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: Step 1 –...
  • Page 63 F u l l - s i z e S B C F S B - B 7 5 G 4.1 Installation: Insert the FSB-B75G DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 8 in order. Step 1 – Install Chipset Driver 1.
  • Page 64 F u l l - s i z e S B C F S B - B 7 5 G Step 4 – Install Audio Driver 1. Click on the Step 4-Audio folder and select the OS folder your system is 2.
  • Page 65 F u l l - s i z e S B C F S B - B 7 5 G Chapter 4 Driver Installation...
  • Page 66 F u l l - s i z e S B C F S B - B 7 5 G Chapter 4 Driver Installation...
  • Page 67 F u l l - s i z e S B C F S B - B 7 5 G Chapter 4 Driver Installation...
  • Page 68 F u l l - s i z e S B C F S B - B 7 5 G Chapter 4 Driver Installation...

  • Page 69: Appendix A Programming The Watchdog Timer

    F u l l - s i z e S B C F S B - B 7 5 G Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer...

  • Page 70: Programming

    FSB-B75G utilizes W83627DHG chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description...
  • Page 71 F u l l - s i z e S B C F S B - B 7 5 G (3) Exit the W83627DHG config Mode. Undesired result may occur if the config Mode is not exited normally. (1) Enter the W83627DHG config Mode To enter the W83627DHG config Mode, two special I/O write operations are to be performed during Wait for Key state.
  • Page 72 F u l l - s i z e S B C F S B - B 7 5 G 0: GPIO5 is inactive. 1: GPIO5 is active. 0: WDTO# and PLED are inactive. 1: WDTO# and PLED are inactive. CR F5h.
  • Page 73 F u l l - s i z e S B C F S B - B 7 5 G 01h: Time-out occurs after 1 second/minute 02h: Time-out occurs after 2 second/minutes 03h: Time-out occurs after 3 second/minutes ………………………………………………….. FFh: Time-out occurs after 255 second/minutes CR F7h.

  • Page 74: W83627Dhg Watchdog Timer Initial Program

    F u l l - s i z e S B C F S B - B 7 5 G A.2 W83627DHG Watchdog Timer Initial Program Register Description 00h: Time-out Disable 01h: Time-out occurs after 1 minute only. 02h: Time-out occurs after 2 second/minutes 03h: Time-out occurs after 3 second/minutes Timer 0x07...
  • Page 75 F u l l - s i z e S B C F S B - B 7 5 G ************************************************************************************ // Procedure : AaeonWDTConfig void AaeonWDTConfig (void){ Byte val; //Super I/O Entry Key outportb(SIOIndex,0x87); outportb(SIOIndex,0x87); //Setting WDT Pin. outportb(SIOIndex,0x2D); val = inportb((SIOData);...
  • Page 76 F u l l - s i z e S B C F S B - B 7 5 G ************************************************************************************ // Procedure : void AaeonWDTEnable (Byte Timer, boolean Unit){ Byte val; //Super I/O Entry Key outportb(SIOIndex,0x87); outportb(SIOIndex,0x87); // Select Logic Device Number Register outportb(SIOIndex,0x07);...

  • Page 77: Appendix B I/O Information

    F u l l - s i z e S B C F S B - B 7 5 G Appendix I/O Information Appendix B I/O Information...

  • Page 78: I/O Address Map

    F u l l - s i z e S B C F S B - B 7 5 G B.1 I/O Address Map Appendix B I/O Information...
  • Page 79 F u l l - s i z e S B C F S B - B 7 5 G Appendix B I/O Information...

  • Page 80: St Mb Memory Address Map

    F u l l - s i z e S B C F S B - B 7 5 G B.2 1 MB Memory Address Map Appendix B I/O Information...

  • Page 81: Irq Mapping Chart

    F u l l - s i z e S B C F S B - B 7 5 G B.3 IRQ Mapping Chart Appendix B I/O Information...
  • Page 82 F u l l - s i z e S B C F S B - B 7 5 G Appendix B I/O Information...
  • Page 83 F u l l - s i z e S B C F S B - B 7 5 G Appendix B I/O Information...

  • Page 84: Dma Channel Assignments

    F u l l - s i z e S B C F S B - B 7 5 G B.4 DMA Channel Assignments Appendix B I/O Information...

  • Page 85: Appendix C Mating Connector

    F u l l - s i z e S B C F S B - B 7 5 G Appendix Mating Connector C - 1 Appendix C Mating Connector...

  • Page 86: List Of Mating Connectors And Cables

    F u l l - s i z e S B C F S B - B 7 5 G C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Mating Connector Available Cable P/N Label Cable...
  • Page 87 F u l l - s i z e S B C F S B - B 7 5 G DIO1 DIO Port Catch 1147-000-10S Connector Electronics CPU_FAN FAN Catch 1190-700-042 Connector Electronics SYS_FAN1 FAN Catch 1190-700-042 Connector Electronics DIMM1 DDR3 KORTAK AR240H-101B-...

  • Page 88: Appendix D Ahci Settings

    F u l l - s i z e S B C F S B - B 7 5 G A ppendix AHCI Settings Appendix D AHCI Settings...

  • Page 89: Setting Ahci

    F u l l - s i z e S B C F S B - B 7 5 G D.1 Setting AHCI OS Installation to Setup AHCI mode Step 1: Copy the files below from the Driver CD: Step 6 - AHCI\Driver\winxp_32 or winxp_64 to Disk.
  • Page 90 F u l l - s i z e S B C F S B - B 7 5 G Step 3: To install “In BIOS Setup Menu”, select Advanced -> SATA Configuration -> SATA Mode Selection -> AHCI Step 4: Next, select Boot -> Boot Option #1 -> DVD ROM Type Appendix D AHCI Settings...
  • Page 91 F u l l - s i z e S B C F S B - B 7 5 G Step 5: To save, select Save & Exit -> Save Changes and Exit Step 6: Setup OS Appendix D AHCI Settings...
  • Page 92 F u l l - s i z e S B C F S B - B 7 5 G Step 7: Press “F6” Step 8: Choose “S” Appendix D AHCI Settings...
  • Page 93 F u l l - s i z e S B C F S B - B 7 5 G Step 9: Mobile Choose “Intel(R) 7 Series Chipset Family SATA AHCI Controller” Desktop Choose “Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller”...
  • Page 94 F u l l - s i z e S B C F S B - B 7 5 G Step 10: Select “ENTER” to choose the model number Mobile Desktop Appendix D AHCI Settings...
  • Page 95 F u l l - s i z e S B C F S B - B 7 5 G Step 11: Setup is loading files Appendix D AHCI Settings...

Table of Contents