Canon Super G3 2nd Line FAX Board-AM1 Service Manual page 18

4
Error Code Error Code > User Error Code
User Error Code
No.
#0003 Time-out for copying or sending/receiving a single page has occurred.
#0005 Time-out for initial identification (T0/T1) has occurred.
#0009 Recording paper has jammed or is absent.
#0011 The document that you are sending is not placed correctly.
#0012 Recording paper is absent at the other party.
#0018 Auto call initiation has failed.
#0022 Documents could not be forwarded to the specified destination because there is
insufficient memory available. The machine can store up to total of 71 jobs of
send and transmission report in memory.
#0037 Image memory overflow at time of reception has occurred.
#0080 A subaddress is not set in the recipient's machine.
#0081 A password is not set in the recipient's machine.
#0099 A job was canceled during transmission to a USB memory media device.
A secured print job was automatically canceled after the timeout period elapsed.
#0102 The subaddress and/or password do not match.
#0107 The document could not be sent because there was insufficient memory available.
#0401 The USB memory media device is full or the maximum number of files that can be
stored in the root directory (the top level of the directory tree in the USB memory
media device) has been reached.
#0402 The image transfer failed when transferring to the memory media because an
invalid character (such as \) was included in the specified filename.
#0403 The job failed because a file with the same name already exists. Generally, if a file
with the same name exists, a number ranging from 1 to 999 is added to the tail of
the name to prevent naming conflicts. However, this error occurred because a file
with the same number added to its file name already exists.
#0404 The job failed because the write protect switch of the USB memory media device
was on.
#0406 The job failed because the USB memory media device was pulled out during
transmission.
An error occurred while data, such as image data, was being transferred to the USB
memory media device. (The connected device may be formatted with a file system
that is not supported by the machine.)
#0407 The length of the full path to the specified file (or folder) exceeded the supported
limit.
The transmission to the USB memory media device was not properly performed
because the length of the full path including the root and file name exceeded the
limit.
#0409 The file could not be saved because the maximum number of files that can be
saved in the destination has been reached.
#0410 Storing cannot be performed because there are too many jobs waiting to be stored.
#0411 The files are already locked by the other operations.
#0701 The specified Department ID does not exist, or the password has changed.
#0702 The document could not be sent because the memory is full.
4 Error Code > User Error Code Error Code
Description
No.
#0703
The memory for image data is full when sending color documents.
#0704 An error occurred when reading address information from the Address Book.
#0706 The address book is currently being imported/exported from the Remote UI, or the
machine is busy with other send related functions.
#0711 The Fax/I-Fax Inbox memory is full.
#0712 The maximum number of files is already stored in the Fax/I-Fax Inbox.
#0713 The document in Fax/I-Fax Inbox was deleted before the link to it was sent via
e-mail.
#0749 You could not execute the job because a service call message is being displayed.
#0751
The file server is not functioning.
The network is down (the server is unable to connect to the network or was
disconnected).
#0752 The SMTP server name and e-mail address are incorrect.
The domain name is incorrect.
The SMTP server is not functioning.
The network is down.
#0753 A TCP/IP error occurred while sending an e-mail. (Socket, Select error, etc.)
#0754 The client machine is not functioning or the network is down when device
information is being delivered. The destination setting is incorrect.
#0755 Jobs cannot be sent because TCP/IP is not functioning correctly.
The IP address is not set.
When the machine was turned ON, an IP address was not assigned to the machine
by the DHCP, RARP, or BOOTP server.
#0761 A PDF or XPS file with a digital signature could not be sent, because a digital
certificate or key pair registered in the machine is corrupt or could not be accessed.
#0762 Could not send to a domain that is not registered as an allowed domain, because
[Allow MDN Not via Server] is set to 'On'.
#0766 The certificate used to send a PDF or XPS with a digital signature has expired.
#0770 Data could not be sent with WebDAV, because the WebDAV server or proxy server
does not support SSL communications.
#0772 The URL for the Rights Management Server is incorrect.
#0773 [The following user mode] is set to 'On', and PDF modes that cannot be set are
selected in forwarding settings.
[Settings/Registration]>[Function Settings] → [Common] → [Generate File].
>[Optimize PDF for Web]>[On] → [OK]
#0801 A timeout error occurred while the machine was communicating with the SMTP
server to send an e-mail or send/receive an I-fax.
The SMTP server returned an error while trying to connect. The destination is
not correct.
An error occurred on the server side during transmission to a file server.
#0802 The name of the SMTP server is incorrect.
The DNS server address settings are incorrect.
The domain name is incorrect.
Connection to the DNS server failed.
#0803 The connection was interrupted due to reasons on the recipient's side before all of
the pages could be sent.
4-3
Description
4-3