Table of Contents
Advertisement
Quick Installation
1. Connect Video cable (HDMI cable)
Make sure both monitor and computer are powered OFF.
Connect the HDMI cable from HDMI output of computer to the HDMI input of the
monitor.
Or connect VGA cable *Optional
Connect the VGA cable from VGA output of computer to the VGA input of the monitor.
2. Connect Power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
3. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
4. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)
Example: 1920 x 1080 @ 60 Hz
Resolution Right-click on the Windows desktop > Display Settings > Advanced Display
Settings. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card's user guide for instructions.
Example:
PC
HDMI cable
VGA cable
3
Power cable
Advertisement
Table of Contents
