Page 1
YACHT ROUTER Installation Manual SERIES 5 The easiest way to stay online. version 1.0...
Page 2
Read carefully. For better understanding check video tutorials on our website. Register your product for software update notifications. Thank you.
Page 3
The contents of this manual are well prepared by Locomarine Networks d.o.o. While we try to improve our equipment at all times, Locomarine Networks d.o.o. shall incur no liability based on contents, updates or modification of the contents, or the lack of contents in this manual.
Page 4
IMPORTANT: It is solely on end-user to set transmitting power value for WIFI Booster to comply with regulations of country where product will be used. Regulations and online WIFI power calculators (EIRP - Equivalent Isotropically Radiated Power) are widely available on the Internet. Locomarine Networks d.o.o. cannot by responsible by any means for improper setup.
Page 5
PREFACE SAFETY INSTRUCTIONS ELECTRICAL SHOCK HAZARD: Do not open enclosure of the equipment if you are not qualified to do it. TURN OFF THE POWER IMMEDIATELY IF WATER LEAKS INTO THE EQUIPMENT OR AN OBJECT DROPS INTO THE EQUIPMENT: Continue operating the equipment could cause electrical shock or fire. Contact your nearest distributor or dealer for service. DO NOT DISASSEMBLE THE EQUIPMENT OR MODIFY THE EQUIPMENT: Improper disassemble or modification could cause electrical shock, fire, or personal injury.
CONTENT INTRODUCTION ABOUT YACHT ROUTER PRO FEATURES WHAT IS IN THE PACKAGE PORTS AND CONNECTORS INDICATORS INSTALLATION CONNECTING ADDITIONAL MODULES AND DEVICES SETUP TECHNICAL SPECIFICATIONS HARDWARE DETAILS NETWORK DETAILS OUTLINE DRAWINGS...
CHAPTER 1 - INTRODUCTION 1.1. ABOUT YACHT ROUTER PRO Yacht Router Pro s5 (Yacht Router Pro in further text) is designed for installation on vessels with single or dual satellite Internet source (VSAT, Inmarsat, Iridium etc.). It will provide the ability to establish nine vessel networks (e.g.
1 Achieved with 9dBi outdoor antenna. As actual range depends on many factors Locomarine Networks d.o.o. do not guarantee specified range of connectivity. 2 Achieved with 9dBi outdoor antenna and VIP mobile provider. As actual range depends on many factors Locomarine Networks d.o.o. do not guarantee specified range of connectivity.
CHAPTER 1 - INTRODUCTION 1.3. WHAT IS IN THE PACKAGE When shipped, all devices are wrapped in plastic bags that protect them from humidity. Devices are then placed into a cardboard box. A bag containing accessory items is placed inside the box too.
Satellite equipment input ports (VSAT, FBB, Iridium etc). It can also be used for any other Internet source equipment like ADSL or mobile router (2G/3G/4G). Yacht Router can be configured to work with max. five SAT ports. It you need this kind of configuration please contact our Support at support@locomarine.com Backbone ports Backbone ports are part of Backbone network.
CHAPTER 1 - INTRODUCTION 1.5. INDICATORS Yacht Router Pro is equipped with multiple LED indicators. Backbone ports 1-3 SAT 2 SAT 1 Reset (not in use) SPF+ Backbone ports 4-8...
CHAPTER 2 - INSTALLATION 2.1. CONNECTING ADDITIONAL MODULES AND DEVICES Yacht Router Pro is intented to work in combination with various Add-on modules. Mobile Expander Pro It is device that will give you possibility to connect Yacht Router to 3G/4G mobile networks. It is equipped with four high power modems and with additional outdoor antennas it is possible to get 30+ NM offshore connection.
Page 13
CHAPTER 2 - INSTALLATION Touch Screen Controller Touch Screen Controller is a dedicated device that will give you ability to setup Yacht router and easily control wireless networks and Internet connections on your vessel. It is embedded device with the same level of functionality as control software that is used on a computer running Windows OS that control Yacht Routers with addition of several features regarding built-in upgrade and software version control functionality.
Page 14
WIBI Booster Network Expander Pro s5 Yacht Router Pro s5 IP camera Navigation system processor Network Extender Satellite Satellite system system Locomarine controller controller NETWORK EXTENDER SERIES 5 Navigation system processor Network Extender Network Extender Locomarine NETWORK EXTENDER SERIES 5...
CHAPTER 2 - INSTALLATION 2.2. SETUP Once you finished hardware installation you need to install Yacht Router Control software to setup and control Yacht Router: Once you install the software refer to USER MANUAL how to use it. It is available for download on our website www.yachtrouter.com You can also check VIDEO TUTORIALS on our website www.yachtrouter.com...
CHAPTER 3 - TECHNICAL SPECIFICATIONS 3.1. HARDWARE DETAILS Power, environment and dimensions AC power supply input range: 110-240 V WAN, LAN, Backbone ports Max. power consumption: 35 W Total number of Ethernet ports: 10 Operating temperature range: -10 to +50 °C Ethernet Satellite WAN ports: 2-5 Operating humidity range: 5-95 % non-condensing Ethernet Vessel Networks (LAN) ports: 0...
CHAPTER 3 - TECHNICAL SPECIFICATIONS 3.3. OUTLINE DRAWINGS All dimensions in mm.
Page 19
IMPORTANT: It is solely on end-user to set transmitting power value for all Yacht Router WIFI components to comply with regulations of country where product will be used. Regulations and online WIFI power calculators (EIRP - Equivalent Isotopically Radiated Power) are widely available on the Internet. It is solely up to user to comply with country regulations and Locomarine Networks d.o.o.
Page 20
APPENDIX INDUSTRY CANADA NOTICE TO USERS Notice: To satisfy IC RF exposure requirements for mobile and base station transmission devices, a separation distance of 63 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the PRO 5 Series and is the answer not in the manual?
Questions and answers