Table of Contents
Advertisement
B.1.3 SIMPLEX MODE
The Simplex Mode provides a continuous serial transmission mode and is selected by
setting A3 to "C" and A6 to "0". The Continuous mode is used to interface to computers,
scoreboards, and other remote devices requiring constant data updating. The transmission
occurs at the end of each display update. Figure B-5 shows the serial data format for
Continuous Mode.
<STX>
<POL> xxxxx.xx
Start
Transmission
Polarity:
<SP> = Positive
"–"
= Negative
FIGURE B-5. Consolidated Controls Continuous Mode
<L/K> <G/N>
Gross/Net:
Weight Data
G = Gross
N = Net
Units:
L = pound
K = kilogram
PCS = pieces*
P = pieces
C = custom units
* Available on TI-500E and TI-500E-SS only
Page B - 3
<STAT>
<CR> <LF>
Carriage
Return
Line
Feed
Status:
<SP> = Valid
M = Motion
O = Over/under range
Advertisement
Table of Contents
