Entering An Id Number - Salter Brecknell 400 Series Setup & Operation Manual

7.3.5 ENTERING AN ID NUMBER

NOTE: To use this feature, ID Number and Print Ticket mode must be enabled in the User Menu. See
Chapter 4 for more information.
Normally, the ID Number value set in the User Menu is printed on the print ticket. If you wish instead to key-in
a new ID Number each time a ticket is printed, you may follow the procedure below before pressing the 0
(PRINT) key.
1. Use the numeric keys to enter the new ID Number value into the indicator.
2. Press the lb/kg key. The indicator briefly displays "SET".
3. Press the 0 (PRINT) key. The new ID number value remains in system memory
until you key-in a new ID number or power OFF the indicator.
Page 7 - 4