Advertisement
2.3.3 Screw both wings to the van.
NOTE: Be careful not to overtighten.
2.3.4 Attach the floor bracket to the van using 2 D-rings, then tighten the bolts that
attach the froor bracket and lower panel.
For technical support, contact us at 1-800-565-5321
NOTE: Drill the holes using 9/64" drill bit to
remove the paint inside the holes.
HARDWARE USED
10×
#90-971 Self-Tapping Screw M6
TOOLS
q Cordless Impact
q T50 Torque Bit
HARDWARE USED
2×
Use the D-ring bolt
3020-TC Installation Guide | REV. F5 | Page 12
TOOLS
q Cordless Drill
q 10mm Socket
q 9/64" Drill Bit
Advertisement
