Operating Method; Emergency Run; Hul Working Theory; Goclean - Beko BEUPC 090 User Manual

Table of Contents

Advertisement

Available languages

Available languages

7

Operating method

7.1

Emergency run

When the remote controller is missing or the
batteries are run out, you can use the Emergency
Button.
Operation method:
Under the "OFF" condition, open the front board
and press Emergency Button with the tip end
of a ball-pen or the like and the Air conditioner
will operate in "AUTO" mode. Press Emergency
Button again to switch off the unit.
7.2

HUL working theory

The UVC led starts working when you activate
the function on the remote controller. When
irradiating microorganisms, it can penetrate the
cell membrane and nucleus of microorganisms,
destroy the molecular bonds of DNA, and make
them instantly lose their replication ability and
activity.
Note: The function will keep
C
working until you turn off it from
remote controller, or when you
turn off the air conditioner.
7.3

GoClean

When you activate the "GoClean" function on
remote controller. Air conditioner will start the
cleaning process in follwoing 3 steps:
a. Frosting: the evaporator temperature drop
down sharply, the frost and ice are created.
b. Heating and melting: turbo heating is on to
melt the ice and dry the water. During the high
temperature 58°C virus will be killed in this
temperature.
c. Drying: the dust is removed and bacteria is
sterilized.
30 /
87
EN
Note: The process will take
C
30-60minutes in total, which
depends on different product
capacity.
Warning: Stay away from
A
air conditioner when the
function in process.

7.4 How to adjust air flow

Vertical direction
Press the "Swing" on the remote controller
repeatedly, louver blades can be set at the fixed
position 1-5 (Fig. 2) or auto swing activates.
In different modes, louver blades swings
repeatedly in the set range.
Fig. 1
7.5

Sleep operation

1. When air conditioner is in on status, press
"SLEEP" button to enter "SLEEP" mode, and
will display on the remote controller.
2. Press "SLEEP" button again,
disappear on the remote controller, and
the sleep (energy saving) function will be
cancelled.
Air-conditioners / User's Manual
will

Advertisement

Chapters

Table of Contents
loading

Table of Contents