Ada ARMO 2D Operating Manual page 7

7
English
be placed in municipal waste. Date of production, manufacturer's contact
information, country of origin are indicated on the product sticker.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
• Measurements through glass or plastic windows;
• Dirty laser emitting window;
• After instrument has been dropped or hit. Please check the accuracy;
• Large fluctuation of temperature: if instrument will beused in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
CARE AND CLEANING
• Please handle line laser with care.
• Clean with soft cloth only after any use. If necessary damp cloth with
some water.
• If the line laser is wet clean and dry it carefully.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
• It cannot be completely excluded that this instrument will disturb other
instruments (e.g. navigation systems);
• will be disturbed by other instruments (e.g. intensive electromagnetic
radiation nearby industrial facilities or radio transmitters).
5
CAUTION STICKER LASER CLASS 2
LASER CLASSIFICATION
The line laser is a laser class 2 laser product accortding to DIN IEC 60825-
1:2014 and Class II.
SAFETY INSTRUCTIONS
• Please follow up instructions given in operators' manual.
• Do not stare into beam. Laser beam can lead to eye injury (even from