Clarion CZ301E Owner's Manual & Installation Manual page 13

Radio Data System Operations
* This function can only be used when
"TP" appears in the display. When "TP"
appears, this means that the "Radio Data
System" broadcast station being received
has traffic announcement programmes.
Setting the TA standby mode
If you press the [TA] button, "TA" lights in
the display and the unit is set into the TA
standby mode until a traffic announcement
is broadcast. When a traffic announcement
broadcast starts, "TRAF INF" appears in the
display. If you press the [TA] button while
a traffic announcement broadcast is being
received, the traffic announcement broadcast
reception is cancelled and the unit goes into
the TA standby mode.
Cancelling the TA standby mode
As "TA" appears in the display, press the
[TA] button. The "TA" in the display goes off
and the TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type
even if the unit is on a function mode other
than radio.
* Some countries do not yet have PTY
broadcast.
* In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
Press [MENU] button, then rotate the
[VOLUME] knob to select PTY type, press
the [VOLUME] knob, the unit begin
searching.
12