Test Run - MrCool DIY E Star Series Owners & Installation Manual

DOUBLE-CHECK PIPE CONNECTIONS
During operation, the pressure of the
refrigerant circuit will increase. This may
reveal leaks that were not present during your
initial leak check. Take time during the Test
section for instructions.
5.
a
.
operating temperature.
b.
IF AMBIENT TEMPERATURE IS BELOW
on the COOL function when the ambient
temperature is below 63°F. In this
instance, you can use the MANUAL
CONTROL button to test the COOL
function.
and raise it until it clicks in place.
2.The MANUAL CONTROL button is
located on the right-hand side of the
unit. Press it 2 times to select the COOL
function. See Fig.
3.Perform Test Run as normal.
Page 35

Test Run

THANK YOU
ductless mini-split heating and air
conditioning product.
company, so we are truly thankful you
trusted us with your business. Should you
need any technical support or just have
please don't hesitate to call us at
the partner site where you purchased it
from actual customers like you are
invaluable to a growing company like ours.
mrcool.com
product on
®