Table of Contents
Advertisement
Quick Links
3 1/2 TON LOW PROFILE
SERVICE JACK
Item Number W1627
WARNING
It is the owner and/or operators' responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English,
the product warnings and instructions shall be read and discussed with the operators' native language by the
purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information
shall be emphasized and understood prior to usage. The product shall be inspected per the operating
instructions.
Users of this product must fully understand these instructions. Each person operating this product must also
be of sound mind and body and must not be under the influence of any substance that might impair their
vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
OWNER'S MANUAL
Advertisement
Table of Contents
Related Manuals for Performance Tool W1627
Summary of Contents for Performance Tool W1627
- Page 1 3 1/2 TON LOW PROFILE SERVICE JACK Item Number W1627 OWNER’S MANUAL WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product instructions for future reference.
- Page 2 SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication.
- Page 3 If unreadable or missing, contact that may occur. The operator must understand that common Performance Tool for a replacement. sense and caution are factors, which cannot be built into this 21. Before use, read manufacturer’s instruction manual for the product, but must be supplied by the operator.
- Page 4 OPERATION To lower: stands of appropriate capacity (not included) beneath the vehicle at locations recommend- 1. Remove all tools, parts, etc. from under the vehicle. ed by the vehicle manufacturer. DO NOT Get 2. Position the saddle under the lifting point. Turn under the vehicle without jack stands.
- Page 5 TROUBLESHOOTING Your Performance Tool® product was constructed with quality materials and workmanship and will give you many years of trouble free use when cared for as described in the "Care & Maintenance" section on page 4. However, as with any mechanical device, periodic adjustments are necessary to maintain a peak level of performance.
- Page 6 REPLACEMENT PARTS LIST...
- Page 7 REPLACEMENT PARTS LIST Description Quantity Retaining Ring 20 Washer 20 Front Wheel Frame Rear Caster Assembly Screw 12X22 Washer 12 Washer 16 Screw 4X15 Nut M16 Washer 18 Handle Yoke Bolt Handle, Lower Section Screw 6X32 Handle, Upper Section Handle Set Screw Handle Yoke U-Joint Hydraulic Power Unit...
- Page 8 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®...
Need help?
Do you have a question about the W1627 and is the answer not in the manual?
Questions and answers