Performance Tool W1645 Owner's Manual

Performance Tool W1645 Owner's Manual

3-1/2 ton low profile jack
Hide thumbs Also See for W1645:

Advertisement

Quick Links

3-1/2 TON
LOW PROFILE JACK
Item Number W1645
WARNING

It is the owner and/or operators' responsibility to study all WARNINGS, operating, and
maintenance instructions contained on the product label and instruction manual prior to operation
of this product. The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator
are not fluent in English, the product warnings and instructions shall be read and discussed with
the operators' native language by the purchaser/owner or his designee. Make sure that the
operator comprehends its contents. Safety information shall be emphasized and understood prior
to usage. The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this
product must also be of sound mind and body and must not be under the influence of any
substance that might impair their vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
OWNER'S MANUAL
Due to continuing improvements,
actual product may differ slightly
from photo shown.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W1645 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Performance Tool W1645

  • Page 1 3-1/2 TON LOW PROFILE JACK Item Number W1645 OWNER'S MANUAL Due to continuing improvements, actual product may differ slightly from photo shown. WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product.
  • Page 2: Safety Guidelines - Definitions

    SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication.
  • Page 3: Important Safety Information

    4. Lifting device only. Immediately after lifting, If unreadable or missing, contact support the vehicle with appropriate means. Performance Tool for a replacement. Ensure that no personnel pass underneath 21. Before use, read manufacturer’s instruction load until load is securely supported by jack manual for the vehicle (or object) you will lift.
  • Page 4: Before Use

    BEFORE USE NOTICE During shipment or handling, air in the jack can become trapped in the hydraulic system causing the jack to malfunction. Figure 1 Before using your jack: 1. Turn pump handle counter-clockwise no more than two turns to open. 2.
  • Page 5: Care And Maintenance

    DO NOT use damaged equipment. 2. Replace worn or damaged parts with Performance Tool replacement parts. Be sure that only qualified personnel perform repairs. illustrated in figure 3. 3. Before each use, thoroughly test the jack for proper operation prior to its actual use.
  • Page 6: Troubleshooting

    TROUBLESHOOTING Your Performance Tool® product was constructed with quality materials and workmanship and will give you many years of trouble free use when cared for as described in the "Care & Maintenance" section on page 4. However, as with any mechanical device, periodic adjustments are necessary to maintain a peak level of performance.
  • Page 7 EXPANDED PARTS LIST No. Description Qty. No. Description Qty. Pump Assy......1 Spring Washer ....4 Body Frame ....... 1 Bolt ........4 Lifting Arm......1 Spring Washer ....2 Castor ......... 2 Nut ........2 Piston Adaptor ....1 Shaft........
  • Page 8 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall disclose to be defective and under warranty.

Table of Contents