WURM AHC-XP Quick Start Manual

Front view

Features


Cost-optimised operation

Used in combination with DCC-XP from version 5

Room temperature sensor and humidity sensor can be connected to the device or over a
CAN bus (TRH-XP, TRS)

Emergency power mode to avoid peak loads by digital input

Display of store temperature, relative humidity, dew point and operating time

4 phase-shifted outputs each for 2 ECA970 electronic load relays

Even distribution of current loads

8 different control characteristics per channel for all standard refrigeration units

Adjustable minimum operating time per channel

Good temperature stability with 72 switchings per hour

Operating time storage for statistical evaluation

Graphical representation of power consumption in FRIGODATA XP

Simple parameter settings

Foreign-language front plates available on request

Direct connection of a CAN-USB to the service socket

Connection to the Wurm system by communication bus (CAN bus) and FRIGODATA XP
AHC-XP_V2.20_PI_2019-04_EN
Dew-point driven power controller for glass and handrail heaters in
Subject to technical modifications
AHC-XP
combination with DCC-XP
Page 1 of 4