Monte Carlo Fan Company 14PRR72 D Series Owner's Manual And Installation Manual page 6

17
Light pan
Remove 3 preassembled screw from the
light pan. Save screws for later use.
19
Light pan
Lexan shade
Attach lexan shade by locating dimples in
light pan with grooves on the Lexan
shade and twist clockwise until tight.
© 2018 Monte Carlo Fan Company
Install LED Light Kit
18
Connect white wire from fan to white wire
from LED module and then connect blue
(or black) wire from fan to blue (or black)
wire from LED module.
Note
: If you don't want to install the
fan with LED light, go to step 20 for
blanking plate installation.
Install Blanking Plate
20
Blanking plate
Attach blanking plate by locating dimples
in light pan with grooves on the blanking
plate and twist clockwise until tight.
Note: Do not install LED light kit if
use blanking plate.
6
19
LED module
Attach LED light kit onto the light pan,
aligning the holes on the LED light kit with
the screw holes on light pan. Reinstall the
screws removed in step 17. Tighten all
screws securely.
05/2018