7. Running the Code You Built on the Board
There are two ways to take the image files you built in Section 4 and run them on the board: (1) Updating
the image file, and (2) Setting up NFS/TFTP to link to your development PC.
7.1 Method 1: Updating the Image File
(1) Run the Web Interface (Steps (1)-(9) in Section 0).
(2) Select "update device firmware" from the main screen:
Figure 15 Updating the Device Firmware from the Web Interface
(3) This brings you to the Software Updater screen. Click "Browse" and browse to the directory z3-netra-
rdk/z3-netra-RDK-(date)/images and select the image file "z3-netra-upd.img" (note: dates and
filenames may vary slightly from values in the Figure):
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
Click here
25
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
Z3-DM8169-APP-L1-RPS V2.01.10