Table of Contents
Advertisement
(11) In this tab, change Video Resolution to "1280x720", set "Output Format" to UDP and "Dest Address"
to the IP address of your PC (in this example, 192.168.0.6). Also make note of the value of "Dest
Port" (should be 5004 by default).
(12) Click "start" (note: The demo may have already started as it will automatically start in 30 seconds if
a valid input is detected. If that occurs, just click "stop" first). The status should change from
"IDLE" or "STOPPED" to "RUNNING" (see
input was not detected.
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
(1) Change to
"1280x720" or
"Follow input"
(2) Change
to UDP
(3) Change to IP
Address of your PC
(4) Note "Dest Port"
value
(5) Click "stop" if
already started,
then click "start"
Figure 5 Channel 1 Configuration Screen
). If status is "POLLING" that means a valid SDI
Figure 5
16
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
Z3-DM8169-APP-L1-RPS V2.01.10
(6) Status can be seen here
Advertisement
Table of Contents
