Table of Contents
Advertisement
CONFIDENTIAL
Z3-DM8169-APP-L1-RPS V2.01.10
5.8 Streaming RTP
Once you have UDP streaming, it is relatively simple to change to RTP streaming. All that is needed are a
change of settings and an SDP file (an example file is provided with the software release from Z3). To
stream using RTP, do the following steps:
(17) In the CH1 configuration tab, click on "stop" to stop the current encoding session.
(18) Change "Output Format" from "UDP" to "RTP" (see Figure 5).
(19) Confirm that "Dest Port" (see Figure 5) is 5004 (this will be important for the VLC configuration).
(20) Click on "start" to start the RTP encoding session.
(21) Copy the "z3-netra.sdp" file received from Z3 to your PC.
(22) Open VLC. Select "Media – Open File" and select the "z3-netra.sdp" file you just copied.
(23) You should then see RTP video streaming on VLC:
Figure 8 Example of Z3 Video Streaming to VLC (RTP)
___________________________________________________________________________________________
18
th
Z3 Technology, LLC ♦ 100 N 8
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
Advertisement
Table of Contents
