5.6 Run the Web Interface to Configure CH1
(8) In your PC, run a web browser (for best results, Z3 recommends FireFox). In this browser, type the IP
address of the board noted in step (7) (for example, if the default value is used, it would be
http://192.168.81.68). After about three seconds, the System Setup menu should come up:
(9) Click on the "CH1" tab
(10) You should see the Channel 1 configuration tab (see
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
Figure 4 Web Interface Initial Screen
15
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
Z3-DM8169-APP-L1-RPS V2.01.10
).
Figure 5