Advertisement
General Information and Safety Instructions
General safety regulations for this electrical tool
IMPORTANT!
When using equipment, a few safety precautions must be observed to
avoid injuries and damage. Please read the complete operating manual
with due care. Keep this manual in a safe place, so that the information
is available at all times. If you give the equipment to any other person,
give them these operating instructions as well.
We accept no liability for damage or accidents which arise due to non-
observance of these instructions and the safety information contained within.
This equipment is not designed to be used by people (including children) with
limited physical, sensory or mental capacities or those with no experience and/
or knowledge unless they are supervised by a person who is responsible for their
safety or they have received instructions from such a person in how to use the
equipment safely.
Children must always be supervised in order to ensure that they do not play
with the equipment.
Safety instructions for Rake and Scarifier
Before use, check the mains cable and extension cable for signs of damage and
aging. If the cable is damaged during operation, disconnect it immediately from
the power supply.
Check the machine for signs of damage before use. If unusual vibrations occur
during use, switch the machine off immediately and pull the plug. Check the
cutters and clean them if necessary. If the machine continues to vibrate, switch it
off, disconnect it from the mains supply and get it checked by a service engineer.
The machine must not be tipped whilst it is being started. Both hands must be on
the handle when you start the machine.
WARNING!
Do not use the scarifier if the connection cable is damaged or worn. Do not
use a damaged cable to connect the machine to the mains supply and do
not touch a damaged cable whilst it is connected to the mains. A damaged
cable can result in contact with live parts. Do not touch the cutters until the
machine has been disconnected from the mains and the cutters have reached
a complete standstill.
Keep extension cables away from the cutters. The cutters can damage the
cables and result in contact with live parts.
AFTER SALES SUPPORT
4
0151 649 1500
1890 946244
GB
IRE
2
www.einhell.co.uk
GLSA 1231, 61307, 08/2014
Advertisement
