Advertisement
Features
PLEASE NOTE!
Our equipment has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for equivalent purposes.
Power cable
Please only use power cables that are not damaged. The total length of the
power cable should not exceed 50 metres; going beyond this distance will
reduce the power output of the electric motor. The power cable must have
a cross-section of 3 x 1.5 mm
is frequently damaged.
Some of the causes for this are:
•
Damage from running over the cable with the scarifier
•
Pinching when the power cable is dragging under doors and
pulled through windows
•
Cracking due to old age of the insulation
•
Kinking by improperly fastening or guiding the power cable
The power cables must, at the very minimum, be of type HO5RN-F and
3-core. The cable type must be printed somewhere on the power cable.
Only purchase power cables that are marked as such!
Plugs and socket couplers for the power cables must be made from rubber
and be splash-proof. There is a limit to how long power cables can be.
Longer power cables require larger conductor cross-sections.
Power cables and connecting lines must be regularly checked for damage.
Ensure that the lines are de-energized before checking them. Completely
unwind the power cable. Also check power cable entry points, plugs and
socket couplers for kinks.
WARNING!
For your added protection we recommend that the mains outlet used for the
Scarifier is equipped with an RCD (Residual Current Device). The operating
current of this device must be no greater than 30mA.
AFTER SALES SUPPORT
. The insulating sheath of scarifier power cables
2
15
0151 649 1500
1890 946244
GB
IRE
4
www.einhell.co.uk
GLSA 1231, 61307, 08/2014
Advertisement
