Preface; Safety Warnings - Procon MelCOMMS MINI Installation Manual

Safety warnings

Caution:
Do not expose to rain or moisture.
Operating Temperature:
The product has been designed to operate between -20° C and +60° C
Shielded Signal Cables:
Use only shielded cables for connecting peripherals to any Procon MelCOMMS MINI device to
reduce the possibility of interference with radio communications services. Using shielded cables
ensures that you maintain the appropriate EMC classification for the intended environment.
CE Notice:
This product has been determined to be in compliance with the following European Safety and
EMC Directives:
2014/30/EU (EMC Directive)
2014/35/EU (Low Voltage Directive)
2011/65/EU (RoHS Directive).
European Union, Class A:
Class A products are intended for use in non-residential/non-domestic environments. Class A
products may also be utilized in residential/domestic environments but may cause interference
and require the user to take adequate corrective measures.
This is a Class A product. In a domestic environment this product may cause radio frequency
interference in which case the user may be required to take adequate measures.
A "Declaration of Conformity" in accordance with the preceding directives and standards has
been made and is available on request.
If this equipment does cause interference with radio communications services, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
Reorient the receiving antenna.
Relocate the Procon MelCOMMS MINI with respect to the receiver.
Move the Procon MelCOMMS MINI away from the receiver.
If necessary, consult a Procon MelCOMMS MINI technical support representative or an
experienced radio/television or EMC technician for additional suggestions.

Preface

• i •