Table of Contents
Advertisement
Before You Begin
This installation guide provides basic instructions
for installing the DAP-3712 on your network.
The device should be ensured that systems
employing high gain directional antennas
are used exclusively for fixed, point-to-point
operations. For additional information about
how to use the access point, please see the
User Manual from the D-Link support website.
Package Contents
This DAP-3712 should include the following
items:
•
20 km Long Range 802.11ac Wireless Bridge
•
PoE injector
•
Power cord
•
Mounting tie
•
Quick Start Guide
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: Using a power supply with a different
voltage than the one recommended for the
device will cause damage and void the warranty
for this product.
System Requirements
•
Microsoft Windows®, or a Linux-based
operating system
•
Ethernet port
•
Microsoft Edge, Firefox 60.0, or Chrome
68.0.3440.106
Quick Installation Guide
Hardware Overview
LED Indicators
1
Figure 1: DAP-3712 LEDs
#
LED
Description
Signal strength indicators. One light
Signal
indicates a weak signal. Two lights
1
Strength
indicate a medium signal. Three lights
indicate a strong signal.
Table 1: LED Descriptions
Interface Connectors
1
2
Figure 2: DAP-3712 Interface
#
Feature
Description
Uses a standard Ethernet cable to
connect the device to a PoE power
1
PoE Port
source such as a PoE switch or PoE
injector.
Reset
Resets the device to its factory
2
Button
settings.
Table 2: Interface Descriptions
1
Advertisement
Table of Contents
