Download Print this page
D-Link DWP-902 Quick Installation Manual

D-Link DWP-902 Quick Installation Manual

Outdoor internet antenna

Advertisement

Quick Links

Building Networks for People
Quick Installation Guide
Outdoor Internet Antenna
This document will guide you through the
basic installation process for your new
D-Link Outdoor Internet Antenna
DWP-902
Quick Installation Guide
Documentation also available
via the D-Link Website

Advertisement

loading

Summary of Contents for D-Link DWP-902

  • Page 1 Building Networks for People Quick Installation Guide Outdoor Internet Antenna This document will guide you through the basic installation process for your new D-Link Outdoor Internet Antenna DWP-902 Quick Installation Guide Documentation also available via the D-Link Website...
  • Page 2: Quick Install Guide

    D-Link support website. Using a power supply with a different voltage rating or PoE injector than the one included with the DWP-902 may cause damage and void the warranty for this product. D-Link DWP-902 Quick Install Guide...
  • Page 3: Physical Installation

    Physical Installation C. Attach the washer and gland to the case DWP-902, then reassemble the sealing insert, clamping claw, and sealing nut. Tighten until STEP 1: Verify SIM/UICC card. snug. STEP 3: Install Articulation Pole on Enclosure Align the holes on the articulation pole to the back of the device and attach using the M5x16 screws and M5 washers.
  • Page 4 STEP 5: Attach DWP-902 to the T- STEP 4: Mount the DWP-902 to a form Bracket Pole Use the included M8x40 Screw Bolt to attach 4A: Attach the T-form Bracket to a the DWP-902-mounted articulation pole to 1.5" to 3" (35mm to 80mm) Pole the T-form bracket.
  • Page 5 Computer Router or Switch A. Connect the Ethernet cable (connected to the DWP-902 in STEP 1) from the DWP-902 to B. Tighten the grounding wire to the DWP-902 the “PoE OUT” port on the PoE Injector. until it is securely attached.
  • Page 6 PC to the PoE Injector “LAN IN” port using an Ethernet cable. B. Open browser http://192.168.17.1. Enter admin as the username and admin as the password to log into the web UI. Once logged in, you can configure the AP via web UI. D-Link DWP-902 Quick Install Guide...
  • Page 7 TECHNICAL SUPPORT For Product Warranty or Technical Support Call U.S. Cellular® Tech Support 1-888-944-9400 D-Link DWP-902 Quick Install Guide...
  • Page 8 Ver. 1.00(USCC)_130x183 2018/05/07...