Table of Contents
Advertisement
Quick Links
PEL-88-A-SWA & PEL-100-A-SWA Wrapping Machines
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered during the inspection, immediately record a complete
description of the damage on the bill of lading. If the product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is
used is exclusively the responsibility of the owner/end-user
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil responsible for
any consequential damages sustained as a result of failing to exercise sound judgment while assembling, installing, using
or maintaining this product.
Table of Contents
Product Specifications..............................................................................................................................2
Signal Words.......................................................................................................................................... 2
Safe Use Recommendations..................................................................................................................... 3
FIG. 1: PEL-88-A-SWA exploded parts diagram & bill of materials.....................................................................4-5
FIG. 2: Electrical system circuit diagram...................................................................................................... 5
FIG. 3: PEL-100-A-SWA exploded parts diagram & bill of materials.................................................................. 6-7
Loading Stretch Wrap.............................................................................................................................. 8
Operation Instructions.............................................................................................................................. 8
System Power....................................................................................................................................... 9
Inspections & Maintenance....................................................................................................................... 9
Troubleshooting Guide............................................................................................................................. 10
Labeling Diagram.................................................................................................................................... 10
Rev. 5/19/2015
V
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Use and Maintenance Manual
Copyright 2015 Vestil Manufacturing Co.
PEL-88-A-SWA, MANUAL.doc
M
ESTIL
ANUFACTURING
Fax: (260) 665-1339
www.vestilmfg.com
e-mail:
Page 1 of 11
C
.
ORP
sales@vestil.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vestil PEL-88-A-SWA
Summary of Contents for Vestil PEL-88-A-SWA
-
Page 1: Table Of Contents
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) Instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil responsible for any consequential damages sustained as a result of failing to exercise sound judgment while assembling, installing, using or maintaining this product. -
Page 2: Product Specifications
If after reading the manual you do not understand an instruction, ask your supervisor or employer for clarification, because failure to adhere to the directions in this manual might result in serious personal injury. Copyright 2015 Vestil Manufacturing Co. Page 2 of 11... -
Page 3: Safe Use Recommendations
Keep the product clean & dry at all times. Always store the unit inside. Only use approved replacement parts. To order replacement or spare parts for this equipment, contact the factory. Copyright 2015 Vestil Manufacturing Co. Page 3 of 11... - Page 4 Rev. 5/19/2015 PEL-88-A-SWA, MANUAL.doc FIG. 1: PEL-88-A-SWA exploded parts diagram and bill of materials Swivel caster with Detail view of carriage rollers: brake (item no. 22): Item no. 12 (touchpad control): Detail view inside motor housing: Status light Speed gauge...
- Page 5 Rev. 5/19/2015 PEL-88-A-SWA, MANUAL.doc PEL-88-A-SWA Bill of Materials: Item Item Part no. Description Quantity Part no. Description Quantity Weldment, frame (upright Flanged inlet sleeve with locking 42-514-002 21-034-025 portion = “mast”) ring in. – 20 x 2 in. HHCS #2...
- Page 6 Turns power of the on and off. carriage Battery charge meter indicates percent of full charge remaining FASTER and SLOWER buttons control the speed the carriage travels up and down the mast Copyright 2015 Vestil Manufacturing Co. Page 6 of 11...
- Page 7 – 20 x 2 in. HHCS #2 11012 33011 in. flat washer zinc-plated bolt in. type A narrow flat Accessories, Electrical control 33004 21-156-006 washer box, Curtis 1210-2401 21-024-042 Motor cover Copyright 2015 Vestil Manufacturing Co. Page 7 of 11...
-
Page 8: Loading Stretch Wrap
When the wrapping process is finished, cut the wrap (for example with a utility knife). Lower the carriage and move the unit to its storage location. Apply the caster brakes (see FIG. Store the wrapping machine in a dry, indoor location to protect the electronic components. Copyright 2015 Vestil Manufacturing Co. Page 8 of 11... -
Page 9: System Power
2. Clean the machine: remove dirt and other matter from all surfaces. 3. Labels: refer to the “Labeling Diagram” on p. 10. Make sure that all labels are in place and readable. 4. Batteries: remove corrosion from the posts if present. Copyright 2015 Vestil Manufacturing Co. Page 9 of 11... -
Page 10: Troubleshooting Guide
The unit should always be labeled as shown in the diagram below. Replace all labels that become damaged or unreadable. B: Label 287 F: Label 399 (inside housing) A: Label 527 C: Label 208 D: Label 454 E: Label 212 Copyright 2015 Vestil Manufacturing Co. Page 10 of 11... - Page 11 (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.
Need help?
Do you have a question about the PEL-88-A-SWA and is the answer not in the manual?
Questions and answers