Advertisement
Table of Contents
SWA-50, SWA-70, & SWA-51-AR Semi-Automatic Stretch Wrap Machines
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
For answers to questions not addressed in these instructions and to order replacement parts,
labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The
department can also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Specifications.................................................................................................................................
Signal Words......................................................................................................................... ........
Hazards of Improper Use.......................................................................................................... ........
FIG. 1: SWA-50 exploded parts diagram & bill of materials......................................................................
FIG. 2A: Stretch wrap carriage subassembly exploded parts diagram & bill of materials........................ ........
FIG. 2B: Manual counterbalanced mast subassembly exploded parts diagram & bill of materials............ ........
FIG. 2C: Thrust bearing subassembly exploded parts diagram & bill of materials................................. ........
FIG. 3: Power unit subassembly with sheave exploded parts diagram & bill of materials........................ ........
FIG. 4: SWA-70 exploded parts diagram & bill of materials.............................................................. ........
FIG. 5: SWA-51-AR exploded parts diagram & bill of materials................................................................
FIG. 6: Electrical system diagram............................................................................................... ........
FIG. 7: Powered mast electrical diagram..................................................................................... ......
Delta Motor Speed Controller.................................................................................................... ......
Installation............................................................................................................................
Stretch Wrap Holder Assembly.................................................................................................. ......
Belt Tensioning Procedure .............. .............................................................................................
Use Instructions.....................................................................................................................
Inspections & Maintenance..............................................................................................................
Labeling Diagram...........................................................................................................................
Troubleshooting............................................................................................................................
Limited Warranty...........................................................................................................................
Table of Contents
Rev. 9/19/2018
Vestil Manufacturing Co.
Instruction Manual
Table of Contents
Copyright 2018 Vestil Manufacturing Corp.
www.vestilmfg.com
SWA, MANUAL
2
2
3
4
5
5
5
6
7
8
9
10
11
12
–
13
13
14
–
15
15
–
16
16
17
18
19
Page 1 of 19
Advertisement
Table of Contents
Related Manuals for Vestil SWA-50
Summary of Contents for Vestil SWA-50
- Page 1 Signal Words….……………………………………………………………………………………………………… …….. Hazards of Improper Use……………………………………………………………………..…………………….. …….. FIG. 1: SWA-50 exploded parts diagram & bill of materials……………………………………………………………. FIG. 2A: Stretch wrap carriage subassembly exploded parts diagram & bill of materials…………………… …….. FIG. 2B: Manual counterbalanced mast subassembly exploded parts diagram & bill of materials………… ……..
-
Page 2: Specifications
Rev. 9/19/2018 SWA, MANUAL Specifications Thank you for purchasing a semi-automatic stretch wrap machine made by Vestil Manufacturing Company (“Vestil”). Our wrapping machines are designed for dependability and incorporate numerous safety-enhancing features. Although use and maintenance procedures are relatively intuitive, all persons who might use or maintain this product must familiarize themselves with the instructions provided in this manual. - Page 3 To reduce the likelihood of injury: • DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized modifications automatically void the Limited Warranty and might make the product unsafe to use.
- Page 4 Table of Contents Rev. 9/19/2018 SWA, MANUAL FIG. 1: SWA-50 Exploded Parts Diagram & Bill of Materials Stretch wrap carriage subassembly (part no. 20- 538-005 shown in exploded form in FIG. 2A on p. 5). Item Part no. Description Item Part no.
- Page 5 & bill of materials Item Part no. Description 20-610-003 Weldment, thrust bearing plate 20-027-011 Load roller 26327 Shoulder screw 0.375in. x 0.5in. in. - 18 zinc-plated #2 nylon lock 37021 Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 5 of 19...
- Page 6 – 16 x 1in. HHCS #2 zinc-plated 20-024-022 Guard, end, formed 11105 bolt 33622 20-016-053 Bracket, mounting in. zinc-plated lock washer 20-029-006 Accessories, electrical, delta controller 99-130-001 Pin, keystock Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 6 of 19...
- Page 7 Hex bolt, grade A, zinc plated, in. – 16 x 33008 in. USS zinc-plated flat washer 11001 External retaining ring, phosphate finish, 33622 in. zinc-plated lock washer 68021 20-016-096 Bracket, tensioning, formed Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 7 of 19...
- Page 8 Spacer, plate 68013 ” external retaining ring 20-016-096 Bracket, tensioning, formed 20-117-003 External retaining ring, 1” diameter Bolt, ”-20UNCx1”, HHCS #2 zinc 20-513-052 Weldment, deck and sprocket 11005 plated Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 8 of 19...
- Page 9 If significant static electricity Cable, 14/3, sjtd, yellow is experienced, bond the frame of the machine to a driven ground rod (see National Electrical Code for details of driven grounding electrodes). Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 9 of 19...
- Page 10 Table of Contents Rev. 9/19/2018 SWA, MANUAL FIG. 7: Powered mast electrical diagram Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 10 of 19...
- Page 11 Motor rated current d 120 percentage of rated output 7-01 Motor no-load current d 75 Sets motor slip compensation 7-02 Torque compensation d 10 Sets maximum startup torque Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 11 of 19...
-
Page 12: Installation
The 2 cords can either both be plugged into a power outlet, or be connected and plugged into an outlet. To connect the cords, plug the turntable power Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 12 of 19... - Page 13 Tube retainer (bottom) 20-014-005 Tube retainer (top) 20-110-002 Bearing, ball, in., shield 68061 in. retainer ring 20-113-022 Spacer, lock 20-113-003 in. fiber washer 20in. plastic wrap (not SRF-18 included) Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 13 of 19...
- Page 14 Make a first mark on the rod that is flush with the top of the access opening (C). Make a second mark in. above the first mark. Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 14 of 19...
-
Page 15: Use Instructions
(A). Use Instructions Standard SWA-50 and -70 wrapping machines must be used indoors. They are designed for moderate duty, intermittent cycling and will wrap loads weighing up to 4,000 pounds (1,818.2kg). The net weight of the pallet or skid and the items stacked on the pallet must not exceed 4,000 pounds. The load rating... -
Page 16: Inspections & Maintenance
12. Overall condition of wrapping machine: the structure should be clean, square and rigid, and free of rust and corrosion. Remove dirt and debris. Do not use the machine if the base is excessively rusted or corroded. Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 16 of 19... -
Page 17: Labeling Diagram
Powered mast models: A and B also applied to junction box at base of mast. A (Label 221) B (Label 325) C (Label 287) D (Label 204) E (Label 824) Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 17 of 19... -
Page 18: Troubleshooting
Motor controller fault or defective d) Check the display on the Delta motor motor controller speed controller for a fault code. If a fault code is displayed, contact Vestil Manufacturing (phone number on cover of this manual). e) Belt is broken or slipping e) If fan of drive motor spins but table does not rotate, release the foot pedal;... - Page 19 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.
Need help?
Do you have a question about the SWA-50 and is the answer not in the manual?
Questions and answers