Header For Hulk Power Board Connection (Cn1) - Epson S1D13C00 User Manual

Push-Buttons and EPD Panel Connectors

Header for Hulk Power Board Connection (CN1)

5.2
The table below shows the pin assignments of CN1.
CN1
Pin Pin name
1 VDD_EPD
2 EPD_BS
3 EPD_RST
4 EPD_BUSY
5 HST/EPD_CSB
6 VCK/EPD_DC
7 EPD_P51
8
9
10
11
12 VST/EPD_SCL
13
14 ENB/EPD_SDA
15
16
10
Power supply for EPD panel.
Tied to VDD_EPD through resistor R49.
EPD bus select. 3-wire serial interface is selected.
Connected to port P03 of S1D13C00.
EPD reset output from S1D13C00.
Connected to port P02 of S1D13C00.
EPD busy input status to S1D13C00.
Chip-select for EPD panel.
Connected to HST output of S1D13C00.
Data/command select for EPD panel.
Connected to VCK output of S1D13C00.
Connected to P06 port of S1D13C00.
- -
- -
- -
P07 Connected to P07 port of S1D13C00.
Serial clock for EPD panel.
Connected to VST output of S1D13C00.
- -
Serial data for EPD panel.
Connected to ENB output of S1D13C00.
- -
GND Ground.
Seiko Epson Corporation
Description
S5U13C00P01C100 Board User Manual
(Rev. 1.0)