S1V3034x Series Evaluation Kit Start Guide Rev.1.00...
Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products.
NIJYO board via serial I/F based on message protocol specifications. The voice data is decoded by the S1V3034x and output as audio signals via the audio amplifier. Voice data can be created on the microSD card using the EPSON Speech IC Speech Guide Creation Tool provided with this evaluation kit. S1V3034x evaluation boards...
For detailed instructions for the evaluation kit, S1V3034x evaluation board function specifications, and instructions on using the EPSON Speech IC Speech Guide Creation Tool, refer to the S1V3034x Series Evaluation Board User Guide and EPSON Speech IC Speech Guide Creation Tool User Guide.
Evaluation board operation can also be checked using voice data created with the EPSON Speech IC Speech Guide Creation Tool. For detailed information on using the EPSON Speech IC Speech Guide Creation Tool, see the EPSON Speech IC Speech Guide Creation Tool User Guide.
Evaluation board setup and connection Connect the evaluation boards as described below (See Fig. 3-4). Connect the NIJYO board to the CASTLE board, making sure that the EPSON logos on the two boards face in the same direction. Set the DIP switches and jumper pin on the CASTLE board and NIJYO boards as shown in Tables 3-1, 3-2, and 3-3.